 |
 |
 |
|
|
|
[Sponsors] | ||||
[snappyHexMesh] mesh multi-connected domains(CFB) using snappyHexMesh |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 28, 2013, 21:41
|
mesh multi-connected domains(CFB) using snappyHexMesh
|
#1 |
|
New Member
luliqiang
Join Date: Dec 2012
Posts: 4
Rep Power: 13  |
I try to mesh a multi-connected domain(CFB) using snappyHexMesh. But, i do not know how to define the location in mesh. can any one give me a hand? thank u. the stl file and snappyHexMeshDict are in the attachment.
|
|
|
|
|
|
June 3, 2013, 14:23
|
|
#2 |
|
Senior Member
Nima Samkhaniani
Join Date: Sep 2009
Location: Tehran, Iran
Posts: 1,266
Blog Entries: 1
Rep Power: 24 |
locationInMesh defines where should be kept
 so you can consider any point on body where remains after snappyHexMesh
__________________
My Personal Website (http://nimasamkhaniani.ir/) Telegram channel (https://t.me/cfd_foam) |
|
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] multi region mesh using snappyHexMesh | fumiya | OpenFOAM Meshing & Mesh Conversion | 1 | September 19, 2016 11:44 |
| [OpenFOAM] snappyHexMesh - can't open mesh in ParaView | tfigueiro | ParaView | 0 | June 11, 2015 19:05 |
| [Netgen] Import netgen mesh to OpenFOAM | hsieh | OpenFOAM Meshing & Mesh Conversion | 32 | September 13, 2011 05:50 |
| [snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
| fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |
Linear Mode
