[blockMesh] Problem with blockMesh on 3D WING

simplefoam · August 14, 2013, 03:34

Hello, i'm trying to mesh a wing, and a model body-wong in 3D with blockMesh, but after dealing and struggling with it i'm getting quite upset. I can't get "OK" with checkMesh, since always got orthogonality and aspect ratio problems. i shouldn't decrease grading too much cause i need low y+

Could anybody help me out with both meshes?

miro2000 · August 14, 2013, 03:58

Hello,

BlockMesh is not an easy tool to create mesh with, it is possible but it takes a lot of time... There are matlab scripts that make dictionaries (that can be found online) for BM but you can never know how correct they are, and if they would work with your airfoil.

So, You should use snappyHexMesh, there is wingmotion tutorial in /incompressible/pimpleDyMFoam/wingMotion, there is a dictionary that will be usefull.

Also, you should make your stl as fine as possible. Ask if you have further questions,

- miro

August 14, 2013, 03:58		#2
miro2000 Member Miro Join Date: Jan 2013 Location: Europe Posts: 51 Rep Power: 13	Hello, BlockMesh is not an easy tool to create mesh with, it is possible but it takes a lot of time... There are matlab scripts that make dictionaries (that can be found online) for BM but you can never know how correct they are, and if they would work with your airfoil. So, You should use snappyHexMesh, there is wingmotion tutorial in /incompressible/pimpleDyMFoam/wingMotion, there is a dictionary that will be usefull. Also, you should make your stl as fine as possible. Ask if you have further questions, - miro Last edited by miro2000; August 14, 2013 at 04:01. Reason: to much words

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ffd_control_point_2d	feiyi	SU2	4	September 30, 2019 12:42
Optimization Problem of ONERA M6 wing in SU2	lbfhappy	SU2 Shape Design	0	November 10, 2017 08:31
[blockMesh] Problem using C in blockMesh	DeAldeEiam	OpenFOAM Meshing & Mesh Conversion	3	November 7, 2017 16:30
[blockMesh] Wing Flap Mesh - BlockMesh	kyounes	OpenFOAM Meshing & Mesh Conversion	0	November 29, 2016 21:31
blockMesh problem	shangzung	OpenFOAM	5	December 9, 2009 08:18