CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   Radial sweep mesh via OpenFOAM or other free tool? (https://www.cfd-online.com/Forums/openfoam-meshing/124293-radial-sweep-mesh-via-openfoam-other-free-tool.html)

kornickel October 1, 2013 11:21

Radial sweep mesh via OpenFOAM or other free tool?
 
2 Attachment(s)
Hi everybody,

I have a ccm-mesh of a case somebody once calculated via STAR-CCM+ and I want to validate the solutions with OpenFOAM. Unfortunately there are several errors checkMesh gives back (after import via ccm26ToFoam) so I made a new geometry that I need to remesh now. My problem is that I don't know how to create a nice HEX-mesh as the old one, swept/extruded and radially disposed. I need to do this with open source/free tools such as blockmesh, snappyhexmesh, gmsh etc.

My geometry is a seventh of a tube with an axial fan in the middle I want to rotate via MRF.

Does anybody know how to start or which tools might be useful to achieve such a mesh as the old one?

Please see the attachments for pictures.


Best regards,
Frank Ubber


All times are GMT -4. The time now is 07:45.