[Other] .plt Mesh

devayabir · November 7, 2013, 01:12

Hi All,
How to convert a .plt format mesh to openfoam readable format .

Thangam · December 11, 2013, 04:01

How did you generate this mesh? However, you may want to look into /OpenFOAM/OpenFOAM-2.1.x/applications/utilities/mesh/conversion for the available options openFoam has to offer. I guess this mesh is from tecplot and a 2D. If thats the case, you could use datToFoam and remember that its always 3D in openfoam and make the patches in the x3 direction empty.

look into this for more info:

http://www.cfd-online.com/Forums/ope...rmat-help.html

hope this helps.

November 7, 2013, 01:12	.plt Mesh	#1
devayabir New Member Devayan Bir Join Date: Jul 2013 Posts: 15 Rep Power: 12	Hi All, How to convert a .plt format mesh to openfoam readable format .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 07:38
Star CCM Overset Mesh Error (Rotating Turbine)	thezack	Siemens	7	October 12, 2016 11:14
[ICEM] surface mesh merging problem	everest	ANSYS Meshing & Geometry	44	April 14, 2016 06:41
[ICEM] Problem making structural mesh on a surface	froztbear	ANSYS Meshing & Geometry	1	November 10, 2011 08:52
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11

December 11, 2013, 04:01		#2
Thangam Member Thangam Natarajan Join Date: Dec 2010 Location: Perth Posts: 70 Rep Power: 16	How did you generate this mesh? However, you may want to look into /OpenFOAM/OpenFOAM-2.1.x/applications/utilities/mesh/conversion for the available options openFoam has to offer. I guess this mesh is from tecplot and a 2D. If thats the case, you could use datToFoam and remember that its always 3D in openfoam and make the patches in the x3 direction empty. look into this for more info: http://www.cfd-online.com/Forums/ope...rmat-help.html hope this helps.