CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   [snappyHexMesh] snappyHexMesh failed castellatedMesh (https://www.cfd-online.com/Forums/openfoam-meshing/129284-snappyhexmesh-failed-castellatedmesh.html)

Dadou February 2, 2014 06:34
snappyHexMesh failed castellatedMesh
 
3 Attachment(s)
Dear Foamers,

First of all, I am sorry if there's already a thread that treats this topic.
I am trying to use sHM to create a simple geometry. With Salome I created .STL files but it seems that when I put them in the sHM and I run it I get this (see image attached). I used separate STL files (intake(1)*, sea) or the one under name ALL which is the merge of both sea and intake(1)

I tried with different stl but alway the same thing. you can find my sHM, blockMesh and the .stl files.

Hope you'll help me thank you

Dadou


*the difference between intake and intake1 is that one of them have 1 more face shared with the sea.

gelbebanane February 10, 2014 04:09
Hi,
through a brief look at your sHMD i saw these errors:
Code:
refinementSurfaces
    {
        All.stl
          {
replace All.stl with your name defined under geometry -> "sea"

Code:
refinementRegions
    {

        All.stl
same as above

Code:
layers
    {
        sphere.stl_firstSolid
        {
you dont use this stl file so uncomment this or change it to your layers.


All times are GMT -4. The time now is 00:20.