CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] Problem with snappyHexMesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 7, 2014, 05:26
Default Problem with snappyHexMesh
  #1
Member
 
Join Date: Mar 2013
Posts: 98
Rep Power: 13
giack is on a distinguished road
Hello to all,
I have a strange problem in the generation of the mesh with snappyHexMesh. When I created it, after the snap step, seems that some cells near the boundary are loss or not follows the boundary. I know that there are some thread about this problem but the solutions presented in their don't work. During the snap step appears this warming:

FOAM Warning : Displacement (-4.016316e-07 1.993513e-06 5.287614e-08) at mesh point 14338 coord (0.009952381 0.04995016 -0.0009597589) points through the surrounding patch faces
Smoothing displacement
Displacement smoothed in = 8.69 s
Moving mesh ...

Is this warming related to the error?

My geometry is very simple: a rectangular with a cylinder inside.
I attach some pictures related to the error.

Someone know what is the problem?
Thanks to all for the willingness
Attached Images
File Type: jpg 3.jpg (12.8 KB, 65 views)
File Type: jpg 35.jpg (78.6 KB, 71 views)
File Type: jpg 35-2.jpg (48.8 KB, 62 views)
giack is offline   Reply With Quote

Old   March 11, 2014, 08:05
Default
  #2
New Member
 
avinashjagdale
Join Date: Feb 2014
Location: pune,India
Posts: 26
Rep Power: 12
avinashjagdale is on a distinguished road
Hi giack,

I too faced the same problem.
To solve it I increased my edge feature refinement level and max refinement in surfaceRefinement.
Still the warning showed up. But this time I didn't get any error.
I checked it with CheckMesh and it seems fine.

When I very high refined blockMesh at start. and It didn't showed any warning at that time.

Hence it must be related to refinement.

I am attaching snaps of my mesh with FOAM warning
Attached Images
File Type: jpg trailingpins.jpg (99.4 KB, 80 views)
avinashjagdale is offline   Reply With Quote

Old   September 18, 2014, 11:03
Default
  #3
New Member
 
Omer
Join Date: Mar 2013
Location: turkey
Posts: 8
Rep Power: 13
bob91 is on a distinguished road
if you solve problem, can you explain me ? I have same problem. I havent been solved this problem what ı do .
bob91 is offline   Reply With Quote

Reply

Tags
snappyhexmesh, snappyhexmesh 3d

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] Problem with decomposePar, snappyHexMesh luca1992 OpenFOAM Meshing & Mesh Conversion 12 August 23, 2017 20:06
[snappyHexMesh] snappyHexMesh problem cfdsolver1 OpenFOAM Meshing & Mesh Conversion 0 June 23, 2016 11:09
[snappyHexMesh] Problem handling with subdictionary in SnappyHexMesh Lorenzo92 OpenFOAM Meshing & Mesh Conversion 0 November 21, 2015 14:57
[snappyHexMesh] Problem with snappyhexMesh: modelling a pore chamber and pore throat model Saideep OpenFOAM Meshing & Mesh Conversion 5 May 10, 2015 15:46
[snappyHexMesh] Problem with snappyHexMesh giack OpenFOAM Meshing & Mesh Conversion 0 March 7, 2014 10:40


All times are GMT -4. The time now is 05:18.