CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   [snappyHexMesh] Problem with snappyHexMesh (https://www.cfd-online.com/Forums/openfoam-meshing/131032-problem-snappyhexmesh.html)

giack March 7, 2014 09:40

Problem with snappyHexMesh
 
3 Attachment(s)
Hello to all,
I have a strange problem in the generation of the mesh with snappyHexMesh. When I created it, after the snap step, seems that some cells near the boundary are loss or not follows the boundary. I know that there are some thread about this problem but the solutions presented in their don't work. During the snap step appears this warming:

FOAM Warning : Displacement (-4.016316e-07 1.993513e-06 5.287614e-08) at mesh point 14338 coord (0.009952381 0.04995016 -0.0009597589) points through the surrounding patch faces
Smoothing displacement
Displacement smoothed in = 8.69 s
Moving mesh ...

Is this warming related to the error?

My geometry is very simple: a rectangular with a cylinder inside.
I attach some pictures related to the error.

Someone know what is the problem?
Thanks to all for the willingness


All times are GMT -4. The time now is 05:19.