|
[Sponsors] |
[blockMesh] --> FOAM FATAL ERROR: face 1 in patch 0 does not have neighbour cell face |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 3, 2020, 12:55 |
--> FOAM FATAL ERROR: face 1 in patch 0 does not have neighbour cell face
|
#1 |
New Member
|
Hi guys,
I am trying to create a pipe using blockMeshDict. I need the pipe to be split into 3 blocks. But I am getting the following error: --> FOAM FATAL ERROR: face 1 in patch 0 does not have neighbour cell face: 4(5 6 12 9) This is my blockMeshDict file. I still find writing my own mesh a bit tricky, could anyone give me a hand? Code:
convertToMeters 1; vertices ( (0.0005 0 0) //0 (0 0.0005 0) //1 (-0.0005 0 0) //2 (0 -0.0005 0) //3 (0.0005 0 0.048) //4 (0 0.0005 0.048) //5 (-0.0005 0 0.048) //6 (0 -0.0005 0.048) //7 (0.0005 0 0.216) //8 (0 0.0005 0.216) //9 (-0.0005 0 0.216) //10 (0 -0.0005 0.216) //11 (0.0005 0 0.24) //12 (0 0.0005 0.24) //13 (-0.0005 0 0.24) //14 (0 -0.0005 0.24) //15 ); blocks ( hex (0 1 2 3 4 5 6 7) (25 1 140) simpleGrading ( 1 ( (0.2 0.3 4) (0.6 0.4 1) (0.2 0.3 0.25) ) 1 ) hex (4 5 6 7 8 9 10 11) (25 1 260) simpleGrading ( 1 ( (0.2 0.3 4) (0.6 0.4 1) (0.2 0.3 0.25) ) 1 ) hex (8 9 10 11 12 13 14 15) (25 1 140) simpleGrading ( 1 ( (0.2 0.3 4) (0.6 0.4 1) (0.2 0.3 0.25) ) 1 ) ); edges ( arc 0 1 (0.000353553 0.000353553 0) arc 1 2 (-0.000353553 0.000353553 0) arc 2 3 (-0.000353553 -0.000353553 0) arc 3 0 (0.000353553 -0.000353553 0) arc 4 5 (0.000353553 0.000353553 0.048) arc 5 6 (-0.000353553 0.000353553 0.048) arc 6 7 (-0.000353553 -0.000353553 0.048) arc 7 4 (0.000353553 -0.000353553 0.048) arc 8 9 (0.000353553 0.000353553 0.216) arc 9 10 (-0.000353553 0.000353553 0.216) arc 10 11 (-0.000353553 -0.000353553 0.216) arc 11 8 (0.000353553 -0.000353553 0.216) arc 12 13 (0.000353553 0.000353553 0.24) arc 13 14 (-0.000353553 0.000353553 0.24) arc 14 15 (-0.000353553 -0.000353553 0.24) arc 15 12 (0.000353553 -0.000353553 0.24) ); boundary ( Heated { type wall; faces ( (4 5 9 8) (5 6 12 9) (6 7 11 12) (7 6 11 8) ); } WallOutlet { type wall; faces ( (11 8 12 15) (8 9 13 12) (9 10 14 13) (10 11 15 14) ); } WallInlet { type wall; faces ( (3 0 4 7) (3 7 6 2) (1 2 6 5) (0 1 5 4) ); } inlet { type patch; faces ( (0 3 2 1) ); } outlet { type patch; faces ( (12 13 14 15) ); } ); mergePatchPairs ( ); |
|
June 19, 2020, 20:07 |
|
#2 |
Member
Lisandro Maders
Join Date: Feb 2013
Posts: 98
Rep Power: 13 |
The combination (5 6 12 9) does not give you a proper face!
Draw your points and faces and you will realize it. Cheers, |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[blockMesh] FATAL ERROR: face 6 in patch 2 does not have neighbour cell face: 4(8 9 21 20) | robingilbert | OpenFOAM Meshing & Mesh Conversion | 28 | November 23, 2023 06:32 |
[blockMesh] Foam fatal error: neighbour cell face | anu.raghun | OpenFOAM Meshing & Mesh Conversion | 2 | June 26, 2019 11:53 |
steadyUniversalMRFFoam Tutorial fails in MixingPlane | HenrikJohansson | OpenFOAM Bugs | 0 | February 14, 2019 04:48 |
[blockMesh] Errors during blockMesh meshing | Madeleine P. Vincent | OpenFOAM Meshing & Mesh Conversion | 51 | May 30, 2016 10:51 |
Problem with rhoSimpleFoam | matteo_gautero | OpenFOAM Running, Solving & CFD | 0 | February 28, 2008 06:51 |