CFD Online Discussion Forums - [blockMesh] Basic problem

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)

- - [blockMesh] Basic problem (https://www.cfd-online.com/Forums/openfoam-meshing/136376-basic-problem.html)

i wanted to create a mesh with blockmesh which includes baffles as well
but i have problem
here i attached the the blockmesh
Attachment 31231
and the error it shows
Attachment 31232

thanks

Hello realfear!

Though I am also a beginner of openfoam, I have checked your blockmesh file. In terminar I found following

Quote:

--> FOAM FATAL ERROR:
face 3 in patch 1 does not have neighbour cell face: 4(19 12 40 47)

Possibly you have missed some neighbour point to mention in blockMesh file. Check the face (19 12 40 47), there is a missing of neighbour point.

I think you should start with a simple tutorial like cavity case, then try to make your own blockMesh file.

Actually what do u wanna simulate? How did you define B.C for such PATCH type FACE?

Regards
Mukut