Mesh Conversion to Openfoam problem
 

Hello everybody, sorry that my first thread is a problem! I was trying to convert a simple geometry (T-shape pipe, two inlet and one outlet) mesh from Salome 7.3.0 to openfoam 2.3.0 on Ubuntu 14.04 and I ran into this error. This is my first time using both softwares so I am suspecting installation issues. I have been looking in Google using different keywards relating to the error but no luck. One more info could be relevant is that I am running this on mac 64 bit processor. I used ideasunvtofoam command and it gave me this message:

Create time

Processing tag:164
Starting reading units at line 3.
l:1
units:" SI: Meter (newton)"
unitType:2
Unit factors:
Length scale : 1
Force scale : 1
Temperature scale : 1
Temperature offset : 273.15


Processing tag:2420
Skipping tag 2420 on line 9
Skipping section at line 9.

Processing tag:2411
Starting reading points at line 20.
Read 5642 points.

Processing tag:2412
Starting reading cells at line 11307.
First occurrence of element type 11 for cell 1 at line 11308
First occurrence of element type 44 for cell 766 at line 13603
First occurrence of element type 41 for cell 2326 at line 16723
Read 0 cells and 5655 boundary faces.

Processing tag:2467
Starting reading patches at line 24915.
For group 6 named inlet trying to read 1125 patch face indices.
For group 7 named inlet trying to read 1125 patch face indices.
For group 8 named outlet trying to read 1125 patch face indices.
For group 9 named wall trying to read 2280 patch face indices.

Sorting boundary faces according to group (patch)
0: inlet is #0 Foam::error::printStack(Foam::Ostream&) at ??:?
#1 Foam::sigSegv::sigHandler(int) at ??:?
#2 in "/lib/x86_64-linux-gnu/libc.so.6"
#3
at ??:?
#4 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6"
#5
at ??:?
Segmentation fault (core dumped)

My question is just where do you think the poblem lies exactly. When I ran tutorials of Openfoam I did not encounter any problem. Yet when I tried to convert the mesh from Salome I get this.
Thank you in Advance :):)