|
[Sponsors] |
[mesh manipulation] using moveDynamicMesh to move a part of the mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 23, 2014, 10:45 |
using moveDynamicMesh to move a part of the mesh
|
#1 |
Senior Member
Samuele Z
Join Date: Oct 2009
Location: Mozzate - Co - Italy
Posts: 520
Rep Power: 18 |
Dear All,
I have a simple channel and I would like to move the backWall (which is a patch) according to a certain function I have computed. I have written a small solver that evaluate how much I have to move each cell center. The point is that the dynamicMeshDict - if I chose to use a fixedValue motion with a non-uniform list - wants the movement of the points and not of the cell-centers. Any idea about how to pass the cell-centers motion? Thanks a lot, Samuele. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
3D Hybrid Mesh Errors | DarrenC | ANSYS Meshing & Geometry | 11 | August 5, 2013 06:42 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
[ICEM] How to mesh part by part? | rikio | ANSYS Meshing & Geometry | 6 | February 24, 2010 19:19 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 18:10 |