CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] SnappyHexMesh - refinement

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 24, 2015, 07:09
Default SnappyHexMesh - refinement
  #1
New Member
 
Andreas V.
Join Date: Jul 2014
Posts: 15
Rep Power: 10
andreas0209@hotmail.com is on a distinguished road
Hi openFoamer,

I have a question regarding refinementCylinder/Boxes.
I have a refinementCylinder and I have include the Cylinder under geometry like this:

Code:
geometry
    refinementCylinder
    ...    
    {
        type searchableCylinder;
        point1 (0 -1.25 -1.25);
        point2 (1.37 1.25 1.25);
    radius 1.25;
    }
When I run snappyHexMesh I have get this message:

Code:
Adding patches for surface regions
----------------------------------

Patch Type                Region                        
----- ----                ------                        
......

5     wall                refinementCylinder            
6     wall                refinementCylinder_slave
Is it correct that the refinementCylinder get the patchtype "wall"? And Does someone knows what the "_slave" is?

Andreas
andreas0209@hotmail.com is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] SnappyHexMesh running killed! Mark JIN OpenFOAM Meshing & Mesh Conversion 7 June 14, 2022 01:37
[snappyHexMesh] snappyHexMesh sticking point natty_king OpenFOAM Meshing & Mesh Conversion 10 August 5, 2019 19:18
[snappyHexMesh] Adding layers goes wrong with SnappyHexMesh Elise OpenFOAM Meshing & Mesh Conversion 1 April 22, 2013 02:32
killed "snappyHexMesh" parkh32 OpenFOAM Pre-Processing 2 April 8, 2012 17:12
[snappyHexMesh] snappyHexMesh aborting Tobi OpenFOAM Meshing & Mesh Conversion 0 November 10, 2010 03:23


All times are GMT -4. The time now is 03:08.