|
[Sponsors] |
[Technical] Filling tha GAP between two meshes |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 14, 2015, 09:52 |
Filling tha GAP between two meshes
|
#1 |
New Member
Join Date: Dec 2015
Posts: 1
Rep Power: 0 |
Hello everyone,
I'm facing a problem: 1) I created a 3D mesh with snappy tool. 2) I made it a 'fake' 2D mesh (aka 1 cell along z direction) 3) Now I made a mirror of this last mesh Now my problem arises: since there is a empty space between this two block (original and mirror), is there any tool in openFoam which can fill this gap? http://postimg.org/image/iewzifqq7/ Now the faces adjacent to the gap have same mesh seeding. My question is how do I fill this gap by extruding these faces creating 'n' layers in between (aka meshing the gap)? |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mapping (interpolation) between two meshes | Ebrahim | OpenFOAM Programming & Development | 2 | June 15, 2020 13:31 |
Flow in gap / Couette Flow with Overset Mesh | Yan77 | STAR-CCM+ | 0 | March 12, 2018 15:32 |
How can I put the data of adpated meshes on the original unadapted meshes? | xh110120 | FLUENT | 2 | March 11, 2016 02:00 |
Hex and Tet meshes - simplefoam comparison | danvica | OpenFOAM Running, Solving & CFD | 10 | January 4, 2013 01:18 |
[snappyHexMesh] Meshing a small gap between walls | staustrahltriebwerk | OpenFOAM Meshing & Mesh Conversion | 1 | July 23, 2012 11:46 |