[Other] Creating a suction hole in a pipe geometry.

Daneish · May 27, 2015, 17:16

Hi,

I'm new to this forum. I would like some advice for creating a geometry and mesh for a suction hole (to remove odour) from a sewer pipe. I have created and meshed the sewer pipe already but now i'm interested in creating that suction hole. I have attached my bockmeshdict file for the sewer pipe. Any advice or ideas on how to approach this would be greatly appreciated.
Whats the best option to do this? Should i continue using blockMesh or use Salome for example.

Many thanks,
Daneish

cutter · August 20, 2015, 16:55

Hi,

maybe this thread helps: http://www.cfd-online.com/Forums/ope...apability.html.

Cutter

Daneish · August 21, 2015, 05:04

Hello Mr. Cutter

I will check out this alternative method. Thank you for this direction.

Best,
Daneish

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] Pump suction pipe simulation	hamza mohamed	ANSYS Meshing & Geometry	0	June 17, 2017 09:48
Vertical Suction Pipe Modeling At simple Pump sump	Mesh33	FLOW-3D	2	August 3, 2016 02:24
[DesignModeler] POROUS Media inside a pipe geometry creation	gauravchauhan	ANSYS Meshing & Geometry	0	April 12, 2014 04:15
Possible Bug in pimpleFoam (or createPatch) (or fluent3DMeshToFoam)	cfdonline2mohsen	OpenFOAM	3	October 21, 2013 09:28
creating model for pipe system????	keng	ANSYS Meshing & Geometry	11	November 14, 2011 10:10

August 20, 2015, 16:55		#2
cutter Senior Member Join Date: Mar 2010 Location: Germany Posts: 154 Rep Power: 16	Hi, maybe this thread helps: http://www.cfd-online.com/Forums/ope...apability.html. Cutter

August 21, 2015, 05:04		#3
Daneish New Member despodan Join Date: May 2015 Location: Cottbus Posts: 7 Rep Power: 10	Hello Mr. Cutter I will check out this alternative method. Thank you for this direction. Best, Daneish