[Other] How to perfom named selection?

Sway · June 25, 2015, 06:28

Hi everyone!

First of all I am a silent reader for years now and this forum has helped a lot! so thanks for this

Till now i have have worked with Ansys Workbench, but lately i am forced to work with openfoam and that realy makes my head spinn

for training i made an STL file of a pipe and i want to simulate the flow trough it.

to my problem:
how do i part the model in different regions or facets? in Ansys it was just selecting all the faces you want, right click and then name it like inlet or whatever you want it to be.
how do you guys do it? I have tried using Salome and FreeCAD but i dont get it.

thanks for your help!

cutter · August 20, 2015, 16:39

Hi,

some time ago I was facing the same problems, after I figured out how to do it in Salome I answered a similar question in another thread: http://www.cfd-online.com/Forums/ope...y-patches.html

You should also have a look at the tools surfaceAutoPatch and surfaceSplitByPatch.

Feel free to ask follow-up questions if that's not enough. Good luck!

Cutter

June 25, 2015, 06:28	How to perfom named selection?	#1
Sway New Member Join Date: Jun 2015 Posts: 11 Rep Power: 10	Hi everyone! First of all I am a silent reader for years now and this forum has helped a lot! so thanks for this Till now i have have worked with Ansys Workbench, but lately i am forced to work with openfoam and that realy makes my head spinn for training i made an STL file of a pipe and i want to simulate the flow trough it. to my problem: how do i part the model in different regions or facets? in Ansys it was just selecting all the faces you want, right click and then name it like inlet or whatever you want it to be. how do you guys do it? I have tried using Salome and FreeCAD but i dont get it. thanks for your help!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
y+ and u+ values with low-Re RANS turbulence models: utility + testcase	florian_krause	OpenFOAM	114	August 23, 2023 05:37
[ANSYS Meshing] Script Connection Friction	arpeedesign	ANSYS Meshing & Geometry	4	April 11, 2019 08:17
Near wall treatment in k-omega SST	Arnoldinho	OpenFOAM Running, Solving & CFD	38	March 8, 2017 13:48
[OpenFOAM] Native ParaView Reader Bugs	tj22	ParaView	270	January 4, 2016 11:39
Problem with compile the setParabolicInlet	ivanyao	OpenFOAM Running, Solving & CFD	6	September 5, 2008 20:50

August 20, 2015, 16:39		#2
cutter Senior Member Join Date: Mar 2010 Location: Germany Posts: 154 Rep Power: 16	Hi, some time ago I was facing the same problems, after I figured out how to do it in Salome I answered a similar question in another thread: http://www.cfd-online.com/Forums/ope...y-patches.html You should also have a look at the tools surfaceAutoPatch and surfaceSplitByPatch. Feel free to ask follow-up questions if that's not enough. Good luck! Cutter