|
[Sponsors] |
August 5, 2015, 12:28 |
dynamic mesh with zone mesh
|
#1 |
Senior Member
Join Date: Jan 2013
Posts: 134
Rep Power: 13 |
Dear all, I want to simulate flow induced vibration of circular cylinders. I have the following question:
I made my case according to the wingMotion tutorial with pimpleDyMFoam solver. The computational grid is arranged like this: in the vicinity of the cylinder, structured mesh is used the resolve the boundary layer and all these grid moving along with the cylinder(with the same velocity); Out of the structured mesh is unstructured mesh where the mesh deformation takes place. How to set these two zones in OpenFoam(I'm using 2.2.2)? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[mesh manipulation] refineMesh Error | mohsen.boojari | OpenFOAM Meshing & Mesh Conversion | 3 | March 1, 2018 22:07 |
Local mesh refinement definition in a DEFORMING dynamic mesh zone using Dynamic Mesh | Emanuele88 | FLUENT | 0 | February 9, 2016 11:39 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 18:57 |
problem on dynamic mesh zone | erkan | FLUENT | 2 | January 8, 2009 16:01 |
Sliding mesh error | Karl Kevala | FLUENT | 4 | February 21, 2001 15:52 |