|
[Sponsors] |
[Commercial meshers] Problem encountered in converting Fluent mesh to OpenFOAM Mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 21, 2015, 16:03 |
Problem encountered in converting Fluent mesh to OpenFOAM Mesh
|
#1 |
New Member
Karnataka
Join Date: Feb 2014
Posts: 20
Rep Power: 12 |
Hello!
My name is Sathya, I am new to using OpenFOAM. I tried converting a .msh file to a foam mesh, and encountered the following error message: /*---------------------------------------------------------------------------*\ | ========= | | | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox | | \\ / O peration | Version: 2.4.0 | | \\ / A nd | Web: www.OpenFOAM.org | | \\/ M anipulation | | \*---------------------------------------------------------------------------*/ Build : 2.4.0-dcea1e13ff76 Exec : fluentMeshToFoam ICMmiddle.msh Date : Nov 21 2015 Time : 20:47:22 Host : "grytfoten" PID : 2218 Case : /lscratch/satcha/OpenFOAM/OpenFOAM-2.4.0/tutorials/compressible/rhoCentralFoam/doublerefined/meshrefinement/0.59 nProcs : 1 sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE). fileModificationChecking : Monitoring run-time modified files using timeStampMaster allowSystemOperations : Allowing user-supplied system call operations // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // Create time Embedded blocks in comment or unknown:�� �|Found end of section in unknown:?n: ( Embedded blocks in comment or unknown:�� �|Found end of section in unknown:? Embedded blocks in comment or unknown:�� �Embedded blocks in comment or unknown:�� �|Embedded blocks in comment or unknown:� �Embedded blocks in comment or unknown:�� I dont know how to deal with this problem , Any advice would be appreciated, thank you I converted a icem mesh to a .msh format, before attempting the mesh conversion. (Just for information) Last edited by sathya123; November 21, 2015 at 16:06. Reason: Missed a point |
|
November 22, 2015, 02:35 |
|
#2 |
Senior Member
anonymous
Join Date: Aug 2014
Posts: 205
Rep Power: 13 |
You need to save the mesh in ASCII format, did you try this?
|
|
November 22, 2015, 04:22 |
|
#3 |
New Member
Karnataka
Join Date: Feb 2014
Posts: 20
Rep Power: 12 |
Hello,
Thanks so much, the mesh conversion works now |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Other] OpenFoam Mesh to Fluent Mesh, 2D | lordvon | ANSYS Meshing & Geometry | 1 | January 14, 2022 13:20 |
FLUENT adding mesh nodes problem when importing 3D mesh from ICEM | guxin7005 | FLUENT | 2 | June 27, 2016 22:41 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 19:57 |
The fluent stopped and errors with "Emergency: received SIGHUP signal" | yuyuxuan | FLUENT | 0 | December 3, 2013 23:56 |
[Commercial meshers] Problem converting fluent (.msh) into .foam format with very big mesh | Balti | OpenFOAM Meshing & Mesh Conversion | 8 | June 20, 2013 17:43 |