CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Meshing & Mesh Conversion

problem with slave cells using toposet while calculating volume flux with swak4foam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 14, 2016, 13:20
Default problem with slave cells using toposet while calculating volume flux with swak4foam
  #1
New Member
 
AW
Join Date: Mar 2016
Posts: 17
Rep Power: 3
Andy_Wang is on a distinguished road
Dear foamers,

i got problem with the setting of toposet to create slave cells. I did this because i want to calculate the volume flux with swakExpression, which needs slave cells. My topoSetDict is as follows:

Code:
actions
(

    {
        name    A0Cells;
        type    cellSet;
        action  new;
        source  cylinderToCell;
        sourceInfo
        {
            p1 (0 0 0.001);
            p2 (0 0 0.008);
            radius 0.03;
        }
    }

    {
        name    A0Face;
        type    faceSet;
        action  new;
        source  cellToFace;
        sourceInfo
        {
            set    A0Cells;
            option both;
        }
    }

    {
        name    A0SlaveCells;
        type    cellSet;
        action  new;
        source  cylinderToCell;
        sourceInfo
        {
            p1 (0 0 0.001);
            p2 (0 0 0.009);
            radius 0.03;
        }
    }

    {
        name    A0Zone;
        type    faceZoneSet;
        action  new;
        source  setsToFaceZone;
        sourceInfo
        {
            faceSet     A0Face;
            cellSet     A0SlaveCells;
            flip        false;
        }
    }
);
I have searched the forum and found one thread that exactly the same problem presents. But it was a thread of 2012, so i decided to open my own thread. Hope it is ok. And the error report i got when i run interFoam like this:

Code:
in file sets/faceZoneSources/setsToFaceZone/setsToFaceZone.C at line 167
    One of owner or neighbour of internal face 524106 should be in cellSet A0SlaveCells to be able to determine orientation.
Face:524106 own:171621 OwnInCellSet:1 nei:171622 NeiInCellSet:1
Could anybody help me please!
Andy_Wang is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Compiling User Fortran with CFX 14.0 on Win64 Raijin Thunderkeg CFX 29 March 9, 2016 12:45
Problem of simulating of small droplet with radius of 2mm liguifan OpenFOAM Running, Solving & CFD 5 June 3, 2014 02:53
how to set periodic boundary conditions Ganesh FLUENT 13 January 22, 2014 05:11
channelFoam for a 3D pipe AlmostSurelyRob OpenFOAM 3 June 24, 2011 13:06
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 22:23.