CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[blockMesh] Create internal faces as patch in blockMesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree15Likes
  • 4 Post By floquation
  • 5 Post By Collin
  • 6 Post By Collin

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 30, 2017, 07:40
Smile Create internal faces as patch in blockMesh
  #1
New Member
 
Masoud
Join Date: Nov 2015
Posts: 6
Rep Power: 10
m.delta68 is on a distinguished road
Hi,

This blockMesh is for a fluidic oscillator and i want to make patches at entrance and exit of feedback channels. I want to make internal faces as a patch or plane to calculate mass flow rate and pressure on these patches using blockMesh. I think i need to use toposet and then CreatePatch to construct these patches but i dont know how to set data inside topoSetDict and how exactly specifying in the topoSetDict where to create these faces.Thank you.
Code:
/*--------------------------------*- C++ -*----------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.3.0                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
FoamFile
{
    version     2.0;
    format      ascii;
    class       dictionary;
    object      blockMeshDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

convertToMeters 0.001;

vertices
(
    (0 -5.15 0) // 0
    (23.475 -5.15 0) // 1
    (23.475 5.15 0) // 2
    (0 5.15 0) // 3
    (0 -5.15 3.25) // 4
    (23.475 -5.15 3.25) // 5
    (23.475 5.15 3.25) // 6
    (0 5.15 3.25) // 7

    (48.6 -1.275 0) // 8
    (48.6 1.275 0) // 9
    (48.6 -1.275 3.25) // 10
    (48.6 1.275 3.25) // 11

    (52.3 -1.63 0) // 12
    (52.3 1.63 0) // 13
    (52.3 -1.63 3.25) // 14
    (52.3 1.63 3.25) // 15

    (48.6 -11.85 0) // 16
    (52.3 -8.15 0) // 17
    (48.6 -11.85 3.25) // 18
    (52.3 -8.15 3.25) // 19

    (52.3 8.15 0) // 20
    (48.6 11.85 0) // 21
    (52.3 8.15 3.25) // 22
    (48.6 11.85 3.25) // 23

    (68.4 -11.85 0) // 24
    (64.6 -8.15 0) // 25
    (68.4 -11.85 3.25) // 26
    (64.6 -8.15 3.25) // 27

    (64.6 8.15 0) // 28
    (68.4 11.85 0) // 29
    (64.6 8.15 3.25) // 30
    (68.4 11.85 3.25) // 31

    (54.6 -4.4 0) // 32
    (54.6 4.4 0) // 33
    (54.6 -4.4 3.25) // 34
    (54.6 4.4 3.25) // 35

    (64.6 -4.4 0) // 36
    (64.6 4.4 0) // 37
    (64.6 -4.4 3.25) // 38
    (64.6 4.4 3.25) // 39

    (68.4 -6.25 0) // 40
    (68.4 -6.25 3.25) // 41

    (68.4 6.25 0) // 42
    (68.4 6.25 3.25) // 43

    (70.85 -1.7 0) // 44
    (70.85 1.7 0) // 45
    (70.85 -1.7 3.25) // 46
    (70.85 1.7 3.25) // 47

    (70.85 0 0) // 48
    (70.85 0 3.25) // 49

    (76.5 -10.825 0) // 50
    (78.6 0 0) // 51
    (76.5 -10.825 3.25) // 52
    (78.6 0 3.25) // 53

    (76.5 10.825 0) // 54
    (76.5 10.825 3.25) // 55

    (87.5 -10.825 0) // 56
    (87.5 -3.425 0) // 57
    (87.5 -10.825 3.25) // 58
    (87.5 -3.425 3.25) // 59

    (87.5 3.425 0) // 60
    (87.5 10.825 0) // 61
    (87.5 3.425 3.25) // 62
    (87.5 10.825 3.25) // 63
);

blocks       
(
    hex (0 1 2 3 4 5 6 7) (300 60 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        (
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // A
    hex (1 8 9 2 5 10 11 6) (300 60 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // B 
    hex (8 12 13 9 10 14 15 11) (40 60 25)
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4)  
        ) 
    )  // C
    hex (8 16 17 12 10 18 19 14) (100 40 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // D
    hex (13 20 21 9 15 22 23 11) (100 40 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // E
    hex (16 24 25 17 18 26 27 19) (140 40 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // F
    hex (20 28 29 21 22 30 31 23) (140 40 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // G
    hex (12 32 33 13 14 34 35 15) (33 60 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // H
    hex (32 36 37 33 34 38 39 35) (140 60 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // I
    hex (25 24 40 36 27 26 41 38) (40 40 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // J
    hex (28 37 42 29 30 39 43 31) (40 40 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // K
    hex (36 40 42 37 38 41 43 39) (40 60 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // L
    hex (40 44 45 42 41 46 47 43) (35 60 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // M
    hex (44 50 51 48 46 52 53 49) (60 35 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // N
    hex (48 51 54 45 49 53 55 47) (60 35 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // O
    hex (50 56 57 51 52 58 59 53) (140 35 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4)  
        ) 
    )  // P
    hex (51 60 61 54 53 62 63 55) (140 35 25) 
    simpleGrading 
    ( 
        1                  // x-direction expansion ratio 
        1
        ( 
            (0.2 0.3 3)    // 20% y-dir, 30% cells, expansion = 4 
            (0.6 0.4 1)    // 60% y-dir, 40% cells, expansion = 1 
            (0.2 0.3 0.33) // 20% y-dir, 30% cells, expansion = 0.25 (1/4) 
        ) 
    )  // Q
);

edges
(
);

boundary
(
    inlet
    {
        type patch;
        faces
        (
            (0 3 7 4)
        );
    }
    outlet1
    {
        type patch;
        faces
        (
            (60 61 63 62)
        );
    }
    outlet2
    {
        type patch;
        faces
        (
            (56 57 59 58)
        );
    }
    walls
    {
        type wall;
        faces
        (
            (2 6 7 3)
            (0 4 5 1)
            (2 9 11 6)
            (1 5 10 8)
            (8 10 18 16)
            (12 17 19 14)
            (9 21 23 11)
            (13 15 22 20)
            (17 25 27 19)
            (16 18 26 24)
            (21 29 31 23)
            (20 22 30 28)
            (13 33 35 15)
            (12 14 34 32)
            (33 37 39 35)
            (32 34 38 36)
            (25 36 38 27)
            (24 26 41 40)
            (28 30 39 37)
            (29 42 43 31)
            (42 45 47 43)
            (40 41 46 44)
            (44 46 52 50)
            (50 52 58 56)
            (51 57 59 53)
            (51 53 62 60)
            (54 61 63 55)
            (45 54 55 47)
        );
    }
    topBottom
    {
        type wall;
        faces
        (
            (4 7 6 5)
            (0 1 2 3)
            (5 6 11 10)
            (1 8 9 2)
            (10 11 15 14)
            (8 12 13 9)
            (10 14 19 18)
            (8 16 17 12)
            (11 23 22 15)
            (9 13 20 21)
            (18 19 27 26)
            (16 24 25 17)
            (22 23 31 30)
            (20 28 29 21)
            (14 15 35 34)
            (12 32 33 13)
            (34 35 39 38)
            (32 36 37 33)
            (27 38 41 26)
            (24 40 36 25)
            (30 31 43 39)
            (28 37 42 29)
            (38 39 43 41)
            (36 40 42 37)
            (41 43 47 46)
            (40 44 45 42)
            (46 49 53 52)
            (52 53 59 58)
            (49 47 55 53)
            (53 55 63 62)
            (44 50 51 48)
            (48 51 54 45)
            (50 56 57 51)
            (51 60 61 54)
        );
    }
    merge1
    {
        type wall;
        faces
        (
            (44 46 47 45)
        );
    }
    merge2
    {
        type wall;
        faces
        (
            (44 48 49 46)
            (48 45 47 49)
        );
    }
);

mergePatchPairs
(
    (merge1 merge2)
);

// ************************************************************************* //

Last edited by wyldckat; April 30, 2017 at 13:17. Reason: Added [CODE][/CODE] markers
m.delta68 is offline   Reply With Quote

Old   January 30, 2017, 13:42
Default
  #2
Senior Member
 
khedar
Join Date: Oct 2016
Posts: 111
Rep Power: 9
khedar is on a distinguished road
1. Please use code blocks to share your code. Its more readable that way. It can be inserted using the "#" button in the edit menu while creating the message.
2. Regarding your problem, this might help:
https://www.cfd-online.com/Forums/op...nal-faces.html
https://www.youtube.com/watch?v=7Ex1RHDQqIc
khedar is offline   Reply With Quote

Old   February 2, 2017, 07:59
Default
  #3
New Member
 
Masoud
Join Date: Nov 2015
Posts: 6
Rep Power: 10
m.delta68 is on a distinguished road
Thank you. I already looked into these links. I want to make internal patch in blockMesh not using Gmsh. If i try to merge 2 faces using mergepatchpairs so there is no patches after that to measure mass flow on them. I want to add internal face as a patch to me use the patchAverage utility to compute the pressure average in given section. How can I set it in the blockMeshDict. Is it possible? How can I set it on the boundary condtions file inside of "0" directory?
I tried the "patch" and "empty" to set internal face patches and blockMesh doesn't work!
m.delta68 is offline   Reply With Quote

Old   February 2, 2017, 09:13
Default
  #4
Senior Member
 
floquation's Avatar
 
Kevin van As
Join Date: Sep 2014
Location: TU Delft, The Netherlands
Posts: 252
Rep Power: 20
floquation will become famous soon enough
You should treat them as external faces.

That is, an internal face comprises two external faces that happen to share the same position in space.

As a simple 1D example:

Code:
The situation:
|       |       |
ext1   int     ext2

should be created as:
|       ||       |
ext1  int1int2  ext2

which is achieved by duplicating the vertices that make up the internal patch,
such that you do not create two faces with the same set of vertices.
That would be ambiguous!
floquation is offline   Reply With Quote

Old   February 3, 2017, 04:57
Default
  #5
Senior Member
 
Alexey Matveichev
Join Date: Aug 2011
Location: Nancy, France
Posts: 1,930
Rep Power: 38
alexeym has a spectacular aura aboutalexeym has a spectacular aura about
Send a message via Skype™ to alexeym
Hi all,

@m.delta68

1. Are you forced to use patchAverage? Why not use surfaceRegion function object to calculate average value on a faceSet? I.e. you still merge patch pairs, then use topoSet to create faceSet of a given cross-section, and then use surfaceRegion function object (http://cpp.openfoam.org/v4/a02578.html) to calculate average.

2. What BC you are going to use on the created patch to avoid flow disturbance?
alexeym is offline   Reply With Quote

Old   February 14, 2017, 04:17
Default
  #6
New Member
 
Masoud
Join Date: Nov 2015
Posts: 6
Rep Power: 10
m.delta68 is on a distinguished road
Thank you for your answer alexeym. No i am not forced to use patchAverage. My problem is that i dont know how exactly create faceSet of a given cross-section using topoSet. Can you please tell me what i need to do step by step because i am not familiar with topoSet. I prefer to not define any BC on created patches or maybe set them as empty.
m.delta68 is offline   Reply With Quote

Old   February 14, 2017, 11:50
Default
  #7
Senior Member
 
Alexey Matveichev
Join Date: Aug 2011
Location: Nancy, France
Posts: 1,930
Rep Power: 38
alexeym has a spectacular aura aboutalexeym has a spectacular aura about
Send a message via Skype™ to alexeym
Since you were going to define patches, guess, you know where your cross-section is located. Use boxToFace topo source to create faceSet (https://github.com/OpenFOAM/OpenFOAM...poSetDict#L248).

Having empty constrain across the flow is not very bright idea. It could be something processor-like, yet surfaceRegion function object is more convenient for the case.
alexeym is offline   Reply With Quote

Old   March 6, 2017, 07:51
Default
  #8
New Member
 
Masoud
Join Date: Nov 2015
Posts: 6
Rep Power: 10
m.delta68 is on a distinguished road
Thank you alexeym. I did what you said and i used boxToFace topo source to create faceSet and it was Ok. Then i tried to create a patch using "createPatch" command but i have a error:
Create time

Create polyMesh for time = 0

Reading createPatchDict

Adding new patch feedback as patch 5 from
{
type patch;
}


Read 13422 faces from faceSet f0


--> FOAM FATAL ERROR:
Face 3121100 specified in set f0 is not an external face of the mesh.
This application can only repatch existing boundary faces.

From function createPatch
in file createPatch.C at line 731.

FOAM exiting

Is this application just for creating external faces? Can i just use the face which i created by topoSet (without making any patch) and then use surfaceRegion function to calculate mass flow and pressure on the face?
m.delta68 is offline   Reply With Quote

Old   March 7, 2017, 18:12
Default
  #9
New Member
 
Collin Strassburger
Join Date: Feb 2017
Location: Oak Ridge, TN, USA
Posts: 10
Rep Power: 9
Collin is on a distinguished road
You're correct that createPatch is only for boundary patches. I have used createBaffles to generate a patch within the field. The process for that is as follows:

1. Add an empty patch to your blockMeshDict
2. Mesh as normal
3. Use faceSet to extract the faces of the cells in the area of interest
4. Use setsToZones to change the faceSet to a faceZone
5. Use createBaffles with the name of your faceZone and the empty patch as the arguments

You'll now have a patch which is in the middle of a formerly solid mesh.

A few words of caution: If the region of interest is not thin enough, then your patch will not be flat. Also, just because the patch has been extracted does not mean that everything will handle it well (such as extrudeMesh; hopefully this won't be an issue for you).

Note: I am running on foam-extend-3.2 so some of the behavior/names may be slightly different.

As for your question about surfaceRegion, I have never tried it; however, in my experience, the "surface" operations require a surface rather than a polymesh.
vs1, Gerhard, superkelle and 2 others like this.
Collin is offline   Reply With Quote

Old   April 3, 2017, 11:35
Default
  #10
New Member
 
Masoud
Join Date: Nov 2015
Posts: 6
Rep Power: 10
m.delta68 is on a distinguished road
Thank you for your answer Collin. I have a problem with creating empty patches inside my geometry. If i try to create a patch on the existing internal faces (existing coordinates) it says this patch is already belong to other pairs or its an internal patch. Also if i try to create a new box with new coordinate, So it would be a mesh inside my main mesh. So how do you exactly create empty patches? I just want to calculate mass flow and pressure somewhere in the middle of my mesh which i dont have any surface or patch. Do you know any any external program or any gadget which can do it without creating any surface or patch. For example i can use probes for calculating pressure but i am not sure if its also reliable for mass flow because its just a point.
m.delta68 is offline   Reply With Quote

Old   April 3, 2017, 15:02
Default
  #11
New Member
 
Collin Strassburger
Join Date: Feb 2017
Location: Oak Ridge, TN, USA
Posts: 10
Rep Power: 9
Collin is on a distinguished road
1) To create an empty patch fur use in this instance, you can go into the OF generated boundary files and add a new one manually.

2) As I recall you can set up internal areas within paraview for such things; i.e. not just as a point probe but for area calculations as well. (I'm not sure about this though)
Collin is offline   Reply With Quote

Old   May 2, 2017, 13:21
Default
  #12
New Member
 
Masoud
Join Date: Nov 2015
Posts: 6
Rep Power: 10
m.delta68 is on a distinguished road
Quote:
Originally Posted by Collin View Post
1) To create an empty patch fur use in this instance, you can go into the OF generated boundary files and add a new one manually.

2) As I recall you can set up internal areas within paraview for such things; i.e. not just as a point probe but for area calculations as well. (I'm not sure about this though)
Thank you Collin for your help. I appreciate if you email me at masoudbaghaie@gmail.com because i need to discuss something with you. Thanks again.
m.delta68 is offline   Reply With Quote

Old   May 26, 2017, 13:21
Default
  #13
New Member
 
Collin Strassburger
Join Date: Feb 2017
Location: Oak Ridge, TN, USA
Posts: 10
Rep Power: 9
Collin is on a distinguished road
For the sake of assisting all those who come to these forums through search engines and the like, I'd prefer to keep things here.
Collin is offline   Reply With Quote

Old   July 12, 2018, 05:27
Default
  #14
New Member
 
bangun
Join Date: Feb 2015
Posts: 16
Rep Power: 11
eb19 is on a distinguished road
Hi,

Is it possible to define a new patch after we run a simulation?

My intention is to calculate a force over an area which is not a solid wall, but an area that is in the fluid domain. Perhaps I have a similar problem as given by Mamoud. I need to compute a force instead of a pressure at a single point.

I have done the simulation, but did not define a patch to specify the area. I know I can use patchIntegrate command, but haven't specified the area on which I want to integrate the pressure to get the force. In this case, can I define a new patch and then do the integration using the command?

Another question is how do I define a patch in a case where the simulation has completed?

If someone knows or can suggest me things, I would appreciate it if you share your knowledge. Thank you.

eb19
eb19 is offline   Reply With Quote

Old   July 12, 2018, 15:43
Default
  #15
New Member
 
bangun
Join Date: Feb 2015
Posts: 16
Rep Power: 11
eb19 is on a distinguished road
[QUOTE=Collin;639887]You're correct that createPatch is only for boundary patches. I have used createBaffles to generate a patch within the field. The process for that is as follows:

1. Add an empty patch to your blockMeshDict
2. Mesh as normal
3. Use faceSet to extract the faces of the cells in the area of interest
4. Use setsToZones to change the faceSet to a faceZone
5. Use createBaffles with the name of your faceZone and the empty patch as the arguments

....

Hi Collin,

Could you please explain a bit further about step 5. I am able to do until step4, but I still do not know how to create a patch from an internal face using this createBaffles command.
Or would you please post your createBafflesDict? and what do you mean with "the empty patch as the arguments"?

Please help me. Thank you.

eb19
eb19 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Decomposing meshes Tobi OpenFOAM Pre-Processing 22 February 24, 2023 10:23
[snappyHexMesh] Error snappyhexmesh - Multiple outside loops avinashjagdale OpenFOAM Meshing & Mesh Conversion 53 March 8, 2019 10:42
[OpenFOAM.org] Compile OF 2.3 on Mac OS X .... the patch gschaider OpenFOAM Installation 225 August 25, 2015 20:43
snappyhexmesh remove blockmesh geometry philipp1 OpenFOAM Running, Solving & CFD 2 December 12, 2014 11:58
Compressor Simulation using rhoPimpleDyMFoam Jetfire OpenFOAM Running, Solving & CFD 107 December 9, 2014 14:38


All times are GMT -4. The time now is 02:53.