|
[Sponsors] |
[Commercial meshers] Mesh an oscillating airfoil with gurney flap |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 22, 2018, 13:33 |
Mesh an oscillating airfoil with gurney flap
|
#1 |
New Member
Milad
Join Date: Feb 2018
Posts: 17
Rep Power: 8 |
hi everyone
i want to mesh an oscillating airfoil with openFOAM. the problem is my airfoil mesh. i cant run this case in wing motion because of the mesh!! i want to ask if any body have any experience in simulating airfoil with gurney flap in openFOAM? i want to mesh this airfoil in gambit . thanks |
|
August 23, 2018, 04:08 |
|
#2 |
Senior Member
|
Hi,
You may want to consider using overset mesh technology if you have quality issues with the mesh. Or, if you are just oscillating around a point you can use an AMI interface between the rotating and stagnant part of the mesh. Than you have the same quality off the cells during the simulation. Tom |
|
August 23, 2018, 04:25 |
mesh airfoil
|
#3 |
New Member
Milad
Join Date: Feb 2018
Posts: 17
Rep Power: 8 |
hi tom
in fact i want to know procedure of dynamic mesh airfoil. i do not have enough information about dynamic mesh in gambit. i attached 2 pictures that explain my case. i hope you can help me thanks the first one is my case the second one is the complete mesh of my case |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ffd_control_point_2d | feiyi | SU2 | 4 | September 30, 2019 12:42 |
[Other] 2D hex mesh on multi element airfoil | Verfblikje | OpenFOAM Meshing & Mesh Conversion | 0 | January 19, 2012 10:55 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
[Other] Oscillating Airfoil and Independently Oscillating Flap | dancfd | OpenFOAM Meshing & Mesh Conversion | 3 | August 26, 2010 18:52 |
What will be the best dynamic mesh update method for an oscillating airfoil? | ivanbuz | FLUENT | 0 | March 15, 2010 18:39 |