CFD Online Discussion Forums
(
https://www.cfd-online.com/Forums/
)
-
OpenFOAM Meshing & Mesh Conversion
(
https://www.cfd-online.com/Forums/openfoam-meshing/
)
- - [Gmsh]
gmsh meshing problem
(
https://www.cfd-online.com/Forums/openfoam-meshing/206379-gmsh-meshing-problem.html
)
CHAYANIT
September 5, 2018 08:08
gmsh meshing problem
I am meshing an airfoil using gmsh. I am facing problem due to uneven mesh spacing in two different surfaces.Is there any command for the same?
All times are GMT -4. The time now is
07:28
.