CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   [Commercial meshers] ICEM - Internal patch appears despite merging meshes (https://www.cfd-online.com/Forums/openfoam-meshing/213323-icem-internal-patch-appears-despite-merging-meshes.html)

krzychu111 December 21, 2018 11:01

ICEM - Internal patch appears despite merging meshes
 
2 Attachment(s)
Hi,


I'm working on generating mesh using ICEM. I decided to create mesh by defining two areas and then merging them. (See the first picture)



I done merging in ICEM, so I got merged outer patches e.g. inlet instead of inlet-far and inlet-close. But there is still a extra patch which should not be defined, named close, which should belong to internalMesh. (see the second picture) It's blocking the simulation because I failed to find boundary condition like "don't care about this" or to merge the patch into internalField.


Does anybody have idea how to solve my problem?


Thanks a lot,
Krzysztof

krzychu111 December 30, 2018 13:08

Would updating workbench change anything? Right now I'm using v16 and current version is 19


All times are GMT -4. The time now is 09:28.