[Other] Meshing for Sandia Flame D

FlameKan · February 21, 2019, 06:13

Hello,

I am a beginner in CFD combustion. I'd like to model the Sandia Flame D using OpenFoam as a practice. But I don't know how to generate the geometry/mesh for the case. So, I am wondering if I can just use the mesh for the Fluent case. If it works, can anyone advise me where to find a mesh?

Thank you.

Krapf · February 21, 2019, 14:06

Hi FlameKan,

I think there is already a tutorial where Sandia Flame D is simulated: https://github.com/OpenFOAM/OpenFOAM...AS/SandiaD_LTS
If you want to do it on your own you could copy the mesh.

Kind regards,
Krapf

FlameKan · February 21, 2019, 21:51

Hi Krapf,

Thank you very much for the info. I'll study the tutorial.

Best regards,
Kan

February 21, 2019, 06:13	Meshing for Sandia Flame D	#1
FlameKan New Member S Li Join Date: Feb 2019 Posts: 9 Rep Power: 7	Hello, I am a beginner in CFD combustion. I'd like to model the Sandia Flame D using OpenFoam as a practice. But I don't know how to generate the geometry/mesh for the case. So, I am wondering if I can just use the mesh for the Fluent case. If it works, can anyone advise me where to find a mesh? Thank you.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] only automatic meshing works,	kazra	ANSYS Meshing & Geometry	2	February 23, 2017 11:38
[ICEM] Flow channel meshing problems	StefanG	ANSYS Meshing & Geometry	19	May 15, 2012 06:44
[ANSYS Meshing] Meshing strategy for External Flows	Hybrid	ANSYS Meshing & Geometry	0	January 24, 2012 14:27
Best Meshing scheme for Cylinder	Nutrex	Main CFD Forum	4	July 29, 2008 11:03
Volume Meshing & Face Meshing? singularity of grid	ken	FLUENT	0	September 4, 2003 11:08

February 21, 2019, 14:06		#2
Krapf Senior Member Join Date: Oct 2017 Posts: 121 Rep Power: 8	Hi FlameKan, I think there is already a tutorial where Sandia Flame D is simulated: https://github.com/OpenFOAM/OpenFOAM...AS/SandiaD_LTS If you want to do it on your own you could copy the mesh. Kind regards, Krapf

February 21, 2019, 21:51		#3
FlameKan New Member S Li Join Date: Feb 2019 Posts: 9 Rep Power: 7	Hi Krapf, Thank you very much for the info. I'll study the tutorial. Best regards, Kan