[snappyHexMesh] About Non-conformal Mesh, Snappy Hex Mesh -- CFD Online Discussion Forums

March 25, 2019, 09:03	About Non-conformal Mesh, Snappy Hex Mesh	#1
Chaitanya2811 New Member Chaitanya Moholkar Join Date: Nov 2017 Posts: 1 Rep Power: 0	Snappy Hex Mesh creates non-conformal mesh. Does anyone know how OpenFOAM handles such Non-conformal Mesh? I am simulating Stirred Tank using Multiple Reference Frame(MRF) technique. Non-conformal Mesh created at interface will not be good especially when it is important to have proper data transfer and minimum loss between rotating and stationary zone. I need help on this.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] Openfoam: Meshing, where do my defaultFaces come from	syntex	OpenFOAM Meshing & Mesh Conversion	19	December 10, 2018 07:21
[Other] mergeMatchPairs with arcs	vainilreb	OpenFOAM Meshing & Mesh Conversion	1	August 5, 2013 08:11
[blockMesh] Blockmesh error - 2D scramjet	ishaninair	OpenFOAM Meshing & Mesh Conversion	7	March 18, 2011 00:14
[snappyHexMesh] snappy hex mesh error	CFT	OpenFOAM Meshing & Mesh Conversion	1	October 9, 2009 07:32
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 09:38

All times are GMT -4. The time now is 00:11.