[snappyHexMesh] problem converting sHM generated mesh to 2D by extrudeMesh -- CFD Online Discussion Forums

May 9, 2019, 06:55

problem converting sHM generated mesh to 2D by extrudeMesh

totoro_jp

New Member

Join Date: May 2019

Posts: 1

Rep Power: 0

Hello !

I am a beginner to OpenFoam and trying to simulate a dam break event via interFoam solver.

I want to run the model in 2D. I generated the mesh using sHM and tried to use extrudeMesh to convert it in to 2D. The generated 2D mesh is successfully viewed in paraView. But to run the simulation, I think I have to re-ageist the boundary patches and I don't have a clue on how to do it.

I followed the steps of https://openfoamwiki.net/index.php/M...Examples/2DsHM but field to do it successfully.

I really appreciate if someone can help! The setup is attached herewith.

Thank you!

Attached Files

trial06_2d_shm.tar.gz (7.8 KB, 3 views)

Tags

3d to 2d, dam break, interfoam, shm

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] Problem by using a mesh	bejanyar	ANSYS Meshing & Geometry	1	July 17, 2015 02:00
[GAMBIT] Forcing a new mesh to conform to a previously generated mesh	pmdelgado2	ANSYS Meshing & Geometry	12	August 28, 2012 00:53
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55
unstructured vs. structured grids	Frank Muldoon	Main CFD Forum	1	January 5, 1999 10:09

All times are GMT -4. The time now is 21:18.