CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] problem with SHM conforming to geometry

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 19, 2019, 04:13
Default problem with SHM conforming to geometry
  #1
New Member
 
Malini Dasgupta
Join Date: Mar 2019
Location: Germany
Posts: 6
Rep Power: 3
malini1408 is on a distinguished road
Hello,


I am relatively new with SHM

I have been struggling for a couple of days with meshing a wedge with a slit as shown in the screenshot. The mesh doesn't conform well with the geometry. This might be a typical problem. But since I am quite new to this, I exactly don't know where to begin with to resolve these sharp edges. I have tried to play around with the resolveFeatureAngle but it too did not help.


I am also attaching a link to my case files.
https://drive.google.com/open?id=1OX...U5HdKbwB5PR94d

Any help will really be appreciated at this point


Regards,
Malini
Attached Images
File Type: png mesh_slit_uneven.PNG (131.9 KB, 17 views)
File Type: png geometry.PNG (16.3 KB, 11 views)
malini1408 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Volume Meshing Problem; YOUR GEOMETRY HAS A HOLE mariachi ANSYS Meshing & Geometry 5 May 30, 2018 02:52
Problem with building geometry - concentric cylinders Rhoddwen OpenFOAM Pre-Processing 9 December 17, 2014 10:02
Problem with geometry - concentric cylinders Rhoddwen OpenFOAM Running, Solving & CFD 0 December 15, 2014 09:22
problem when imported geometry from 3D CAD to star ccm, TAREK GANAT STAR-CCM+ 1 May 21, 2013 22:15
[Gmsh] Problem meshing an imported geometry Alicia OpenFOAM Meshing & Mesh Conversion 0 March 30, 2010 04:53


All times are GMT -4. The time now is 11:36.