|
[Sponsors] |
[mesh manipulation] refineMesh problem with erroneous grid |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 9, 2019, 05:06 |
refineMesh problem with erroneous grid
|
#1 |
Senior Member
TWB
Join Date: Mar 2009
Posts: 400
Rep Power: 19 |
Hi,
I tried to use refineMesh for a 2D structured grid: refineMesh -overwrite to refine in all directions (x,y) The grid size increases from 48000 to 192000. I tried to inspect the grid. Each cell is divided into 4 cells in most cases, which is correct. However, some cells divide into strange shape, as shown attached. Why is this so? Black is the org, blue is the new mesh. So how can I correct it? Thanks! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
On grid independent solution for pulsatile flow | David | FLUENT | 5 | March 25, 2022 03:33 |
Problem with grid sensitive test cases(shock instability) in SU2.!!! | Vino | SU2 | 2 | November 27, 2014 04:33 |
cgns grid problem | praveen | SU2 | 20 | March 10, 2014 14:09 |
Grid Independence problem | immortality | OpenFOAM Running, Solving & CFD | 6 | May 28, 2013 18:12 |
nonstaggered grid problem | Zhi-Xing Yu | Main CFD Forum | 7 | August 26, 1998 13:22 |