CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[surface handling] Subdivision of faceZone or baffle

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 14, 2019, 09:23
Default Subdivision of faceZone or baffle
  #1
hyn
New Member
 
Join Date: Aug 2019
Posts: 1
Rep Power: 0
hyn is on a distinguished road
Hi,


I am trying to divide a faceZone (which I use as a baffle) into several smaller ones. That way, I plan to be able to specify slightly different boundary conditions for each of them.


I was not able to find anything to achieve this (other than manually splitting it). The goal is to have a high number of divisions, requiring some kind of algorithm to generate them. Even going to a 1 face per baffle would be ok.



Is something like this possible? Thanks
hyn is offline   Reply With Quote

Old   August 23, 2019, 07:37
Default
  #2
Senior Member
 
Muhammad Waqas
Join Date: Jul 2014
Location: Germany
Posts: 123
Rep Power: 9
mwaqas is on a distinguished road
Send a message via Skype™ to mwaqas
Hi,


You can use topoSetDict to split single faceZone into multiple faceZones. But it is also kind of manual as you have to write the coordinates of each vew faceZone.


Regards
mwaqas is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
decomposePar problem: Cell 0contains face labels out of range vaina74 OpenFOAM Pre-Processing 37 July 20, 2020 06:38
[snappyHexMesh] Error snappyhexmesh - Multiple outside loops avinashjagdale OpenFOAM Meshing & Mesh Conversion 53 March 8, 2019 10:42
Problems using createBaffles to create a 3D thermal baffle zfaraday OpenFOAM Running, Solving & CFD 10 September 6, 2017 18:07
[snappyHexMesh] handling of baffle regions or surfaces with zero thickness with snappyHexMesh StSchiff OpenFOAM Meshing & Mesh Conversion 5 March 8, 2017 10:45
Calculate Mass Flowrate at a faceZone with OpenFOAM4 donQi OpenFOAM Post-Processing 1 August 31, 2016 22:13


All times are GMT -4. The time now is 01:18.