CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[foamyMesh] Issue in the exported cfmesh+ mesh file.

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   August 20, 2019, 09:15
Default Issue in the exported cfmesh+ mesh file.
New Member
Ashish Tiwari
Join Date: May 2018
Posts: 3
Rep Power: 6
Ashish Tiwari is on a distinguished road

I have created a mesh on cfmesh+ (trial version) for the DriveAer car body(External Aerodynamics).I ran the checkMesh and it displayed zero errors. The number of Inflation layers is 15 with smooth transition.
I exported the mesh as a fluent mesh. So I converted it using FluentToFoam.
Now, while running it using SimpleFoam, I am having problems with the convergence. It creates a boundary called: "defaultFaces_26".
Can anybody tell me what is defaultFaces_26 and how do I rectify the convergence issue?

I have attached the images of the Domain, the global mesh and the inflation layers.

Thank you
Attached Images
File Type: png driveAer Mesh front layers.png (38.4 KB, 16 views)
File Type: png DriveAer global layers.png (25.0 KB, 16 views)
File Type: png DriveAer Domain.png (17.7 KB, 14 views)
Ashish Tiwari is offline   Reply With Quote


cfmesh'mesh'errors, cfmeshpro, convergence failure, defaultfaces, meshing 3d

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Custom Thermophysical Properties wsmith02 OpenFOAM 3 July 27, 2015 05:37
[Other] Adding solvers from DensityBasedTurbo to foam-extend 3.0 Seroga OpenFOAM Community Contributions 9 June 12, 2015 17:18
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
Trouble compiling utilities using source-built OpenFOAM Artur OpenFOAM Programming & Development 14 October 29, 2013 10:59
[swak4Foam] build problem swak4Foam OF 2.2.0 mcathela OpenFOAM Community Contributions 14 April 23, 2013 13:59

All times are GMT -4. The time now is 01:20.