CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   [CAD formats] FreeCAD defining faces (https://www.cfd-online.com/Forums/openfoam-meshing/220557-freecad-defining-faces.html)

flowwwww September 11, 2019 10:24

FreeCAD defining faces
 
Hello,
I am working in a project and i would like to ask something about the definition of the faces to work on openfoam.
I made a geometry in other CAD program, and now i need to define the inlets, outles and walls before start the analysis on openfoam.
I need to know how to define the names of the faces into freecad.
I am going to mesh in SnappyHexMesh therefore i just need to give a name to the faces.
I have saved the file on .STL and opened in FreeCAD.

Best regards.


All times are GMT -4. The time now is 16:01.