CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Commercial meshers] meshing with ICEM

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By EFC

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 17, 2019, 21:28
Default meshing with ICEM
  #1
EFC
New Member
 
México
Join Date: Apr 2019
Posts: 4
Rep Power: 6
EFC is on a distinguished road
Hi everyone ¡
My case is about Multi-Regions Problem. I am meshing the geometry with ICEM; after dealing with some troubleshooting finally, I got the mesh but when I import the .msh to OpenFoam some problems appear......

For example, I have every region that I want but not the interface between those regions (visible in the archive called boundary), which is essential in order to solve this kind of problem (using the ChtMultiRegion solver). What could be happening with the interface?

note: I tried doing every single patch on each face but the problem remains

please, someone with experience using ICEM to create multiple meshes and its convection to OpenFoam.

I will appreciate some advice.

Thanks to all.
fumiya likes this.
EFC is offline   Reply With Quote

Old   August 23, 2020, 22:48
Default
  #2
New Member
 
wanghongjie
Join Date: Apr 2020
Posts: 28
Rep Power: 5
wanghongjie is on a distinguished road
Quote:
Originally Posted by EFC View Post
Hi everyone ¡
My case is about Multi-Regions Problem. I am meshing the geometry with ICEM; after dealing with some troubleshooting finally, I got the mesh but when I import the .msh to OpenFoam some problems appear......

For example, I have every region that I want but not the interface between those regions (visible in the archive called boundary), which is essential in order to solve this kind of problem (using the ChtMultiRegion solver). What could be happening with the interface?

note: I tried doing every single patch on each face but the problem remains

please, someone with experience using ICEM to create multiple meshes and its convection to OpenFoam.

I will appreciate some advice.

Thanks to all.
Did you have a solution? Maybe a useful case can you provide it for me?
wanghongjie is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] Vertex numbering is dense KateEisenhower OpenFOAM Meshing & Mesh Conversion 7 August 3, 2015 11:49
Meshing a Mixing Plane in ICEM Will Anderson ANSYS Meshing & Geometry 2 November 9, 2010 10:16
Meshing a Mixing Plane using ICEM Will Anderson FLUENT 0 November 6, 2010 18:08
[ICEM] ICEM meshing problem xyq102296 ANSYS Meshing & Geometry 6 October 28, 2010 11:09
ICEM meshing question gsbhatia89 ANSYS Meshing & Geometry 5 June 14, 2010 09:24


All times are GMT -4. The time now is 06:59.