CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] Meshing of multiple regions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 3, 2019, 20:31
Default Meshing of multiple regions
  #1
New Member
 
Tharun Reddy
Join Date: Nov 2019
Posts: 1
Rep Power: 0
sunny21996 is on a distinguished road
how to define multiple fins in snappyHexmesh
actually i have to mesh multiple fins so how do i define that multiple fins in snappyhexmesh
sunny21996 is offline   Reply With Quote

Old   December 4, 2019, 08:05
Default
  #2
Member
 
ingraban's Avatar
 
Ingo Riess
Join Date: Jun 2019
Location: Switzerland
Posts: 40
Rep Power: 6
ingraban is on a distinguished road
That should not be a problem. I just meshed a number of cars and trucks in a tunnel. I created a *.stl file that included all the cars. In this case, the surface of all the cars are included in a single patch. But in principle, it should be possible to include several *.stl files in one run of snappyHexMesh. Then it might create separate patches for each part of the geometry.
ingraban is offline   Reply With Quote

Old   December 4, 2019, 18:22
Default
  #3
HPE
Senior Member
 
HPE's Avatar
 
Herpes Free Engineer
Join Date: Sep 2019
Location: The Home Under The Ground with the Lost Boys
Posts: 932
Rep Power: 12
HPE is on a distinguished road
- I would like to give the CFD-Online Oscar for the Broadest Question to the question.
- I kindly suggest you to read the forum guidelines to get better, and quicker help.
HPE is offline   Reply With Quote

Reply

Tags
multiple cylinders, snappyhexmesh 3d

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] How to mesh multiple parts simultaneously and connect them after meshing? casey_chen ANSYS Meshing & Geometry 8 October 18, 2019 04:08
Error creating multiple regions with chtmultiregionfoam Jagirhussan OpenFOAM 0 July 9, 2016 19:25
[CAD formats] Clean / Repair STL file with multiple regions on command line matthiasd OpenFOAM Meshing & Mesh Conversion 6 May 24, 2016 07:51
Moving mesh - Multiple Regions user10600 OpenFOAM Programming & Development 1 December 10, 2015 06:01
Fluent + ansys meshing dif regions kvloover FLUENT 3 February 13, 2012 10:19


All times are GMT -4. The time now is 11:28.