|
[Sponsors] |
[snappyHexMesh] Unknown Issue When Refining Mesh in Area of Interest |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 17, 2021, 08:36 |
Unknown Issue When Refining Mesh in Area of Interest
|
#1 |
New Member
Greg Walker
Join Date: Apr 2021
Posts: 1
Rep Power: 0 |
Hello,
I am currently investigating the effect of surface contamination over a laminar flow aerofoil (S1210). When using snappyHexMesh to refine the mesh around the aerofoil and wake zone, snappyHexMesh will only refine the aerofoil - but not the wake zone. I have tried to fix this following the tutorial resources available for OpenFOAM but nothing has helped. Can anyone offer advice on why this might be/how to resolve the issue? I have defined the bounding box large enough to be included in the refinement area and I'm not sure how to proceed. Thanks in advance, Greg |
|
April 18, 2021, 05:44 |
|
#2 |
Senior Member
M
Join Date: Dec 2017
Posts: 703
Rep Power: 13 |
Without an image and your dictionaries it is impossible to say anything.
|
|
Tags |
airfoil 3d, blockmesh boundary layers, laminar flow, mesh refinement, snappyhexmesh 3d |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[OpenFOAM] ParaView command in Foam-extend-4.1 | mitu_94 | ParaView | 0 | March 4, 2021 14:46 |
[snappyHexMesh] non uniform mesh near the stl object | vava10 | OpenFOAM Meshing & Mesh Conversion | 0 | January 31, 2021 15:41 |
[Commercial meshers] converting Fluent mesh to openfoam standard mesh | deepesh | OpenFOAM Meshing & Mesh Conversion | 31 | March 29, 2017 06:59 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 10:38 |
Issue with arbitrary Lagrangian-Eulerian method and mesh optimization | mikolchon | Main CFD Forum | 0 | August 16, 2014 16:50 |