[snappyHexMesh] "No layers to generate" - help with layer addition needed -- CFD Online Discussion Forums

May 27, 2021, 10:22

"No layers to generate" - help with layer addition needed

Clau.77

Member

Claudia

Join Date: Mar 2021

Posts: 43

Rep Power: 5

Hey guys!

I am struggling to add layers to my geometry. You can see the whole geometry in the picture (grey = air, green =chocolate, red= tray). I also attatched a screenshot of the tray with its mesh. Now i want to add layers, but i am always getting the message "no layers to generate".

I attached the snappyHexMesh file and the log file.

Could somebody give me some tips? I would really appreciate some help

Attached Images

	WholeGeometry_Sliced.PNG (155.6 KB, 8 views)
	Form_Mesh.jpg (146.9 KB, 8 views)

Attached Files

	log_snappyHexMesh.txt (112.7 KB, 4 views)
	snappyHexMeshDict.txt (9.3 KB, 6 views)

Tags

layers, layers addition, meshing, snappyhexmesh

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Layers not growing at all	zonda	OpenFOAM Meshing & Mesh Conversion	12	June 6, 2020 11:28
[snappyHexMesh] Triangular elements in boundary layers generated by snappyHexMesh	mike.franky	OpenFOAM Meshing & Mesh Conversion	0	June 3, 2018 09:46
[snappyHexMesh] SHM is not extruding/adding Layers everywhere	matthiasd	OpenFOAM Meshing & Mesh Conversion	2	October 16, 2016 16:45
[snappyHexMesh] sHM layer process keeps getting killed	MBttR	OpenFOAM Meshing & Mesh Conversion	4	August 15, 2016 03:21
[snappyHexMesh] SnappyHexMesh no layers and no decent mesh for complex geometry	pizzaspinate	OpenFOAM Meshing & Mesh Conversion	1	February 25, 2015 07:05

All times are GMT -4. The time now is 10:29.