|
[Sponsors] |
[snappyHexMesh] Open source repository - Adaptive mesh refinement |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 14, 2021, 08:11 |
Open source repository - Adaptive mesh refinement
|
#1 |
Member
Wouter
Join Date: Aug 2013
Posts: 41
Rep Power: 13 |
Hi everyone,
we just released an open-source version of the adaptive mesh refinement we've implemented at AirShaper: https://airshaper.com/blog/open-sour...esh-refinement It has been possible for quite some time to do adaptive mesh refinement in OpenFOAM / snappyHexMesh in terms of volume cells (plenty of libraries & tutorials available). But those typically only refine the volume cells and not the surface cells. In this repository, we keep a copy of the original mesh before it is snapped to the surface. The refinement is then performed on this non-snapped mesh, after which it is snapped to the geometry again. This allows for refinement on the surface and it also guarantees accurate snapping of features & surfaces. We're very much looking forward to any feedback & contributions from the community! Cheers, Wouter Remmerie & the AirShaper team. wouter@airshaper.com |
|
Tags |
adaptive mesh refinement, mesh adaptation, open source, refined mesh, snappyhesmesh |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[openSmoke] LaminarSMOKE compilation error | mdhfiz | OpenFOAM Community Contributions | 8 | July 2, 2024 11:32 |
[swak4Foam] Installation Problem with OF 6 version | Aurel | OpenFOAM Community Contributions | 14 | November 18, 2020 17:18 |
[swak4Foam] groovyBC in openFOAM-2.0 for parabolic velocity bc | ofslcm | OpenFOAM Community Contributions | 25 | March 6, 2017 11:03 |
[swak4Foam] build problem swak4Foam OF 2.2.0 | mcathela | OpenFOAM Community Contributions | 14 | April 23, 2013 14:59 |
"parabolicVelocity" in OpenFoam 2.1.0 ? | sawyer86 | OpenFOAM Running, Solving & CFD | 21 | February 7, 2012 12:44 |