|
[Sponsors] |
[Other] There's a problem when I make stokesV wave in 2D empty flume made by hypermesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 10, 2021, 06:23 |
There's a problem when I make stokesV wave in 2D empty flume made by hypermesh
|
#1 |
New Member
Miaoyinqi
Join Date: Dec 2021
Posts: 1
Rep Power: 0 |
Recently, when I try to check wave making in 2D empty flume, the Mesh by hypermesh make wave break or Strange vibration in postProcessing date.
I just "fluentMeshtofoam XXX.mesh", and checkMesh is ok.I didn't modify any setting except changing the water depth to 0.5 m.(I do these in the StokesV in interFoam of tutorials.) when I use "interFoam" to run this simulation, it runs well. but the result in postProcessing date(like wave surface) looks wrong, just not smooth and strange vibration. And I see there are strange phenomenon in inlet boundary. when I try same size and density mesh made by Icem or blockMesh, all wave surface are great smooth. If there is anyone know this problem, and tell me how to deal it? or Is this problem made by hypermesh? thanks everybody alot! |
|
Tags |
hypermesh, openfoam, stokes5thwave |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Outlet boundary condition for wave flume with interFoam solver | Arnoldinho | OpenFOAM | 9 | July 10, 2018 05:15 |
Help! Compiled UDF problem 4 Wave tank tutorial | Shane | FLUENT | 1 | September 3, 2010 02:32 |
Installation OF1.5-dev | ttdtud | OpenFOAM Installation | 46 | May 5, 2009 02:32 |
Regarding FoamX running Kindly help out | hariya03 | OpenFOAM Pre-Processing | 0 | April 18, 2008 04:26 |
problem in solving "wave generation" problem | san | FLUENT | 2 | April 3, 2006 23:37 |