CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] simpleGrading (1 1 8) in blockMesh causes problem with nCellsBetweenLevels

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 25, 2022, 16:06
Default simpleGrading (1 1 8) in blockMesh causes problem with nCellsBetweenLevels
  #1
Member
 
Giles Richardson
Join Date: Jun 2012
Location: Cambs UK
Posts: 83
Rep Power: 12
ufocfd is on a distinguished road
Anyone notice that using simpleGrading factors = (1 1 8) in blockMesh causes
a problem with the nCellsBetweenLevels setting in snappyHexMesh?

In other words if you have simplegrading factor = 8,
it appears to disable the nCellsBetweenLevels functionality.
ufocfd is offline   Reply With Quote

Reply

Tags
blockmesh, ncellsbetweenlevels, simplegrading, snappyhexmesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[OpenFOAM] Error !! No. of points and fields don't match mkjmalik ParaView 4 November 2, 2019 11:37
[blockMesh] Create internal faces as patch in blockMesh m.delta68 OpenFOAM Meshing & Mesh Conversion 14 July 12, 2018 15:43
[blockMesh] meshing a cylinder Nico A. OpenFOAM Meshing & Mesh Conversion 6 June 19, 2017 15:12
pimpleDyMFoam - rho not found maasyraf3 OpenFOAM Running, Solving & CFD 10 June 5, 2017 14:05
blockMesh problem shahilc OpenFOAM Pre-Processing 3 March 4, 2016 14:51


All times are GMT -4. The time now is 23:48.