Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] simpleGrading (1 1 8) in blockMesh causes problem with nCellsBetweenLevels

Updated Threads

Reply

Search this Thread

September 25, 2022, 15:06	simpleGrading (1 1 8) in blockMesh causes problem with nCellsBetweenLevels	#1
ufocfd Member Giles Richardson Join Date: Jun 2012 Location: Cambs UK Posts: 98 Rep Power: 13	Anyone notice that using simpleGrading factors = (1 1 8) in blockMesh causes a problem with the nCellsBetweenLevels setting in snappyHexMesh? In other words if you have simplegrading factor = 8, it appears to disable the nCellsBetweenLevels functionality.

Reply

Tags

blockmesh, ncellsbetweenlevels, simplegrading, snappyhexmesh

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM] Error !! No. of points and fields don't match	mkjmalik	ParaView	4	November 2, 2019 10:37
[blockMesh] Create internal faces as patch in blockMesh	m.delta68	OpenFOAM Meshing & Mesh Conversion	14	July 12, 2018 14:43
[blockMesh] meshing a cylinder	Nico A.	OpenFOAM Meshing & Mesh Conversion	6	June 19, 2017 14:12
pimpleDyMFoam - rho not found	maasyraf3	OpenFOAM Running, Solving & CFD	10	June 5, 2017 13:05
blockMesh problem	shahilc	OpenFOAM Pre-Processing	3	March 4, 2016 13:51

All times are GMT -4. The time now is 08:12.