CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   [Salome] mesh conversion (https://www.cfd-online.com/Forums/openfoam-meshing/255678-mesh-conversion.html)

saideh April 23, 2024 12:27
mesh conversion
 
hi,
I did mesh by Salome and want to convert it to the openfoam mesh to use I exported mesh as .mesh file and use the command of fluentmeshtofoam.... however the boundary condition is not implemented there... i did make the group faces and named the boundaries

rocketLauncher May 23, 2024 09:13
Hello,

To convert a Salome mesh to openfoam, you have to export it as a .unv format. Then you use

Quote:
ideasUnvToFoam fileName.unv
then you can run checkMesh to see the quality of your mesh.

The command you used is for Ansys Fluent meshes being converted to Openfoam and it is for files of the .msh extension.


All times are GMT -4. The time now is 02:57.