CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Other] OpenFOAM workshop mesh handling and generation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 12, 2008, 07:13
Default OpenFOAM workshop mesh handling and generation
  #1
New Member
 
Andrew Jackson
Join Date: Mar 2009
Posts: 1
Rep Power: 0
andrewpjackson is on a distinguished road
Dear All,

This is a reminder to anyone working in the area of OpenFOAM mesh generation, moving mesh or any other related meshing tasks. If they would
like to present in the forthcoming "mesh handling and generation" session in the OpenFOAM workshop in Milan the closing date for a short a
bstract on their work is the 31st March 2008.

regards
Andrew Jackson

http://www.openfoamworkshop.org/08/i...itle=Main_Page
andrewpjackson is offline   Reply With Quote

Old   March 18, 2008, 09:47
Default Hi Andrew, I am preparing a
  #2
Senior Member
 
Vincent RIVOLA
Join Date: Mar 2009
Location: France
Posts: 283
Rep Power: 18
vinz is on a distinguished road
Hi Andrew,

I am preparing an abstract on high quality grid generation for OpenFOAM.
Should I send it to you or somebody else?

Regards,

Vincent
vinz is offline   Reply With Quote

Old   July 17, 2012, 08:43
Default disappearing internal wall after conversion
  #3
cps
New Member
 
Join Date: Jul 2012
Posts: 1
Rep Power: 0
cps is on a distinguished road
Hello All,
Just I am trying to work with OpenFoam and appears problem with internal wall.
I used Centaur export mesh to fluent cas and convert this mesh in to OpenFOAM.
Unfortunately , I lost a info subject internal wall.
I believe that is some method for create a mesh included internal wall for OpenFOAM.
I open for any suggestion, what kind of free tools should I use for proper mesh generating.


I would like to setup a pressure wall drop on this internal wall




before conversion into OpenFOAM

-----------------------------------
| ~~~~~~~~:~~~~~~~ |
| inlet ~~~~ :~~~~~~~ | outlet
|~~~~~~~ ~:~~~~~~~ |
-----------------------------------

: -- internal wall


after conversion
-----------------------------------
| ~~~~~~~~ ~~~~~~~|
| inlet ~~~~ ~~~~~~~ | outlet
|~~~~~~~~ ~~~~~~~ |
-----------------------------------

P.S. I am a fresh OpenFOAM user and I am open for cooperation with OpenFOAM expert.


Thanks and regards,

Joe
cps is offline   Reply With Quote

Old   July 17, 2012, 13:34
Default
  #4
Senior Member
 
mturcios777's Avatar
 
Marco A. Turcios
Join Date: Mar 2009
Location: Vancouver, BC, Canada
Posts: 740
Rep Power: 28
mturcios777 will become famous soon enough
Do a search for threads about baffles, internal/zero thickness walls, and the createBaffles and mergeOrSplitBaffles utilities. That should give you a good start.

In a nutshell, you'll need to select the faces that used to be part of the internal wall and turn them into baffles.

On a side note, please include screenshots or sketches in the future; the ASCII drawing you made is very difficult to see what you want, and the formatting on different browsers can cause it to appear distorted/different than you want.
mturcios777 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] problems generating clean mesh Christian_tt OpenFOAM Meshing & Mesh Conversion 2 June 20, 2019 06:39
[snappyHexMesh] snappyHexMesh does not create any mesh except one for the reference cell Arman_N OpenFOAM Meshing & Mesh Conversion 1 May 20, 2019 18:16
OpenFOAM 4.0 Released CFDFoundation OpenFOAM Announcements from OpenFOAM Foundation 2 October 6, 2017 06:40
On body-fitted cartesian mesh generation sbaffini Main CFD Forum 0 October 21, 2016 11:32
OpenFOAM Training and Workshop Zagreb 2628Jan2006 hjasak OpenFOAM 1 February 2, 2006 22:07


All times are GMT -4. The time now is 08:34.