|
[Sponsors] |
[Commercial meshers] How to modify a fluent case on FoamX |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 7, 2006, 07:57 |
How to modify a fluent case on FoamX
|
#1 |
New Member
joegi
Join Date: Mar 2009
Location: genova, genova, italia
Posts: 11
Rep Power: 17 |
Hi there,
I don't know if this is a problem of my installation, but after converting a fluent case into OF format, I cannot modify or see the boundary conditions using FoamX. I just got in all fields empty descriptor. But, using a text editor I can verify the BC and I can modify them. Any sights of what could be the problem? Cheers, Joel |
|
June 7, 2006, 09:08 |
Hello
Under Mesh-Patches yo
|
#2 |
Member
Marcus Hammar
Join Date: Mar 2009
Posts: 33
Rep Power: 17 |
Hello
Under Mesh-Patches you should be able to change the bc:s. When I convert meshes all my boundaries are set to empty so I have to reset the bc:s manually again. If you cant change the bc:s then maybe(as you say) there is something wrong with your FoamX. Try to reinstall or try another version. /Marcus |
|
June 7, 2006, 09:28 |
Hi,
Well probably it is a p
|
#3 |
New Member
joegi
Join Date: Mar 2009
Location: genova, genova, italia
Posts: 11
Rep Power: 17 |
Hi,
Well probably it is a problem of my installation, dont know, but I tryed in another machine and it was exactly the same. So Hrvoje if you read this message, I'm having this problem under fedora 5 (64bits version). I cannot modify the fields under mesh-patches on FoamX, they are all blocked and set to empty. And according to the previous reply the bc's can be reset manually under FoamX. It's not a big problem, I still can run OF, but I'm wondering what could be the reason, 'cause probably this will bug me on the future. Thanks, Joel |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Exporting mesh from a fluent case file | WPBP | FLUENT | 0 | July 19, 2015 20:53 |
CFX overwhelming Fluent in mass convergence of boundary layer separation case | Pierre1 | FLUENT | 7 | March 26, 2015 22:43 |
my case works fine with FLUENT 14.0 but gives error with FLUENT 15.0 | ayousefi | FLUENT | 1 | December 19, 2014 08:00 |
Fluent case to OpenFOAM conversion | umichsct | OpenFOAM | 4 | April 23, 2011 15:59 |
Fluent case file into Gambit | Eric R. | FLUENT | 7 | July 17, 2002 15:11 |