[Other] 2D unstructured mesh

majidhojjat · March 26, 2009, 03:19

Hi!

Recently I am modeling a 2D problem using empty patches. Due to complexity of the geometry I can not use the "blockMesh" tool.

Has anybody some experience in importing 2D mesh to OpenFoam?

Previously I have used for 3D geometries, ICEM to produce unstructured mesh and FluentMeshToFoam to import it. That worked perfectly. but in 2D, there should be a single layer of elements in the third direction. I tried extruding a 2D mesh in ICEM, but then it was not possible to assign "part" name to the faces of the extruded mesh (because mesh is not a geometry object). So i had no boundaries (inlet, outlet, etc.) in OpenFoam.

Thanks!

chegdan · May 14, 2009, 17:09

Hi,

You can just make a 2D mesh in say GAMBIT and export it as such. When importing into OF, the mesh will be changed into a 3D mesh with an empty front and back.

March 26, 2009, 03:19	2D unstructured mesh	#1
majidhojjat New Member Majid Hojjat Join Date: Mar 2009 Location: Munich, Germany Posts: 3 Rep Power: 17	Hi! Recently I am modeling a 2D problem using empty patches. Due to complexity of the geometry I can not use the "blockMesh" tool. Has anybody some experience in importing 2D mesh to OpenFoam? Previously I have used for 3D geometries, ICEM to produce unstructured mesh and FluentMeshToFoam to import it. That worked perfectly. but in 2D, there should be a single layer of elements in the third direction. I tried extruding a 2D mesh in ICEM, but then it was not possible to assign "part" name to the faces of the extruded mesh (because mesh is not a geometry object). So i had no boundaries (inlet, outlet, etc.) in OpenFoam. Thanks!

May 14, 2009, 17:09	Just import a 2D mesh into OF	#2
chegdan Senior Member Daniel P. Combest Join Date: Mar 2009 Location: St. Louis, USA Posts: 621 Rep Power: 0	Hi, You can just make a 2D mesh in say GAMBIT and export it as such. When importing into OF, the mesh will be changed into a 3D mesh with an empty front and back.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 07:38
how to set periodic boundary conditions	Ganesh	FLUENT	15	November 18, 2020 06:09
[snappyHexMesh] No layers in a small gap	bobburnquist	OpenFOAM Meshing & Mesh Conversion	6	August 26, 2015 09:38
[ICEM] 2D profile unstructured mesh	h3nn3	ANSYS Meshing & Geometry	2	June 17, 2015 10:09
Mesh motion with Translation & Rotation	Doginal	CFX	2	January 12, 2014 06:21