CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   [Other] Missing BC in mesh conversion from Star-cd to OpenFOAM (https://www.cfd-online.com/Forums/openfoam-meshing/65521-missing-bc-mesh-conversion-star-cd-openfoam.html)

piccinini June 17, 2009 12:00

Missing BC in mesh conversion from Star-cd to OpenFOAM
 
Hello,

I've converted a mesh from Star-CD to OpenFOAM. No error is printed, but one boundary condition (stagnation) is missing in constant/polymesh/boundary.

Has someone else seen this?

hjasak June 18, 2009 08:05

This could only happen if you have no faces in that boundary in your Star model - could you please check.

Otherwise, all boundary faces get read and converted into boundary conditions.

Hrv

piccinini June 19, 2009 09:12

Hi, hjasak

I do have cells assigned to that boundary condition. It's a case I've already run in Star-CD.

The conversion does not find my stagnation BC. I can provide you star.bnd and the resulting boundary file if you want to take a look (~1MB zipped, it exceeds forum maximum file size)

thanks


All times are GMT -4. The time now is 14:12.