|
[Sponsors] |
[snappyHexMesh] snappyHexMesh doesn't merge points? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 19, 2009, 16:16 |
snappyHexMesh doesn't merge points?
|
#1 |
New Member
Axel Tietjen
Join Date: Dec 2009
Location: Hamburg, Germany
Posts: 19
Rep Power: 16 |
Hello,
I'm writing my diploma thesis about the usage of OpenFOAM for engine development, and have only experience of one month. My aim is the simulation of a small pre-chamber (about 20mm in diameter), and so I have to generate good mesh for it. But after meshing with snappy and slicing it in paraFoam, it shows some very tiny cells that could better have been merged. I've attached a screenshot with the problem-areas highlighted. I have already tried varying every parameter in the snappyHexMeshDict, that seems to be involved with snapping and merging, but it shows no success. Can anyone help me to merge those cells? I don't want to have too small cells because the solution seems to get more unstable with smaller cells. I'd appreciate any hint. Axel |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[openSmoke] libOpenSMOKE | Tobi | OpenFOAM Community Contributions | 562 | January 25, 2023 09:21 |
[snappyHexMesh] Help with Snappy: no layers growing | GianF | OpenFOAM Meshing & Mesh Conversion | 2 | September 23, 2020 08:26 |
[CAD formats] Creating waterproof STL using snappyHexMesh or salome | Tobi | OpenFOAM Meshing & Mesh Conversion | 58 | May 13, 2020 06:01 |
snappyHexMesh - memory corruption (OF-v. 2.2.x) | pct | OpenFOAM Bugs | 9 | July 21, 2013 13:57 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |