|
[Sponsors] |
[snappyHexMesh] snappyHexMesh memory or install problem? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 12, 2010, 09:50 |
snappyHexMesh memory or install problem?
|
#1 |
Member
Jim Carow
Join Date: Apr 2010
Location: Michigan, USA
Posts: 41
Rep Power: 16 |
Hi All,
I receive the following error running snappyHexMesh during mesh castellation surface refinement iterations: new cannot satisfy memory request. This does not necessarily mean you have run out of virtual memory. It could be due to a stack violation caused by e.g. bad use of pointers or an out of date shared library The number of cells is over 2 million since I had to increase the limit in snappyHexMeshDict. I am running Ubuntu 9.04/OF 1.6 on a 32 bit Core2 with 3 gb of RAM. Is this an install problem or a memory problem? Any ideas or workarounds are welcomed. thanks, Jim |
|
Tags |
error, memory, snappyhexmesh, virtual memory |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] snappyHexMesh <-> dynamicMeshDict problem with protected cells | Billy_16 | OpenFOAM Meshing & Mesh Conversion | 2 | November 21, 2020 03:34 |
[ANSYS Meshing] Interface node number and memory allocation problem | Whitebear | ANSYS Meshing & Geometry | 2 | June 22, 2016 04:41 |
[snappyHexMesh] snappyHexMesh: problem meshing baffle (surface with zero thickness) | julien.decharentenay | OpenFOAM Meshing & Mesh Conversion | 7 | June 16, 2012 08:12 |
Polyflow Simulation with ViscoElastic Model memory problem | sid2909 | FLUENT | 0 | May 10, 2010 05:29 |
CFX CPU time & real time | Nick Strantzias | CFX | 8 | July 23, 2006 17:50 |