[snappyHexMesh] Snappy Hex Mesh problems

likefry · April 3, 2011, 23:26

Hi all,

I'm having some problems with snappyhexmesh in openfoam in creating a new shape.

I'm trying to model a 3d boat rudder i've made in solidworks. I created the STL file in solidworks but i can't get it to create the mesh.

when i run snappyhexmesh it created a new layer but its empty.

i've used the motorbike example as a template and no matter what i do i can't get it to work.

Here is the SHM file.

Any help would be greatly appreciated.

I know i'm getting an empty mesh as when i run checkmesh it says the size is 0 cells.

Wes

colinB · April 4, 2011, 03:52

Hi
one of the problems you have, is that you have different names for the same things in your sHMD file:

airfoil1rudder =! rudderPatch

look for these two above mentioned names in your file and ensure that they are the same.

This should help to fix your problem.

Finally another remark:
For troubles with sHM there is a separate Forum so it is more convenient to use that.
regards

Colin

mfiandor · September 22, 2011, 04:14

Hi,

where is that separate forum for SHMD?

really keen on it

elvis · September 22, 2011, 06:49

Hi,
http://www.cfd-online.com/Forums/ope...snappyhexmesh/

you also might have a look at Discretizer
http://www.discretizer.org/
=>Discretizer-Setup gives some aid dealing with SHM
http://www.discretizer.org/files/boxdialog.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 05:38
[snappyHexMesh] About Non-conformal Mesh, Snappy Hex Mesh	Chaitanya2811	OpenFOAM Meshing & Mesh Conversion	0	March 25, 2019 09:03
[snappyHexMesh] Snappy Hex Mesh - issue with smoothness of the model edges	olek.warc	OpenFOAM Meshing & Mesh Conversion	1	August 31, 2018 11:31
[snappyHexMesh] Pure hex mesh with snappy	alf23	OpenFOAM Meshing & Mesh Conversion	17	February 17, 2013 14:24
[blockMesh] BlockMesh number internal faces and boundary	ynos	OpenFOAM Meshing & Mesh Conversion	6	December 13, 2011 05:36

April 4, 2011, 03:52		#2
colinB Senior Member Join Date: Aug 2010 Location: Groningen, The Netherlands Posts: 216 Rep Power: 18	Hi one of the problems you have, is that you have different names for the same things in your sHMD file: airfoil1rudder =! rudderPatch look for these two above mentioned names in your file and ensure that they are the same. This should help to fix your problem. Finally another remark: For troubles with sHM there is a separate Forum so it is more convenient to use that. regards Colin

September 22, 2011, 04:14		#3
mfiandor New Member Miguel Join Date: Jan 2010 Posts: 12 Rep Power: 16	Hi, where is that separate forum for SHMD? really keen on it

September 22, 2011, 06:49		#4
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	Hi, http://www.cfd-online.com/Forums/ope...snappyhexmesh/ you also might have a look at Discretizer http://www.discretizer.org/ =>Discretizer-Setup gives some aid dealing with SHM http://www.discretizer.org/files/boxdialog.jpg