Persistent problem with locationInMesh in for snappy
 

Hi I've been using the forums for a while now but this is my first post.

I'm tearing my hair out trying to get my snappyHexMesh to work but I'm getting the following persistent error:

--> FOAM FATAL ERROR:
Point (4.13 4.91 9.95) is not inside the mesh or on a face or edge.
Bounding box of the mesh:(-30 -5 0) (5 5 10)

From function refinementParameters::findCells(const polyMesh&) const
in file autoHexMesh/autoHexMeshDriver/refinementParameters/refinementParameters.C at line 121.

FOAM exiting

I've tried a large range of co-ordinate sets for the point without success.

The simulation is for a supersonic landspeed mockup. What is frustrating is that I used a similar setup before, but on a much smaller scale, for a bullet and had no troubles at all.

Really need some help.

Thanks.

Jimmy.

Problem solved. The blockMesh was generating incorrectly.

error
 

hi Jimmah
whould you please tell me how can you solve this error?
i have the same problem in my SHM.
thanks:)

May I know whats the problem with your blockMEsh?
I have been having the same problem for my external aerodynamic model

You all must make sure that your blockMesh domain encloses your model entirely.