CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

Sphere Reacting Foam

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 18, 2011, 21:41
Default Sphere Reacting Foam
New Member
Join Date: Jul 2011
Posts: 7
Rep Power: 8
zovie is on a distinguished road
I have a case to simulate combustion of biomass, and the biomass particle is like a half sphere. The case just like reacting foam with different mesh (a half sphere).
My question :
a. Can I use reacting foam solver for that mesh? or I have to configure reacting foam solver to simulate my case?
b. Is there an example case in openfoam that similar to my case?

Thanks for your attention.
Best regards.
zovie is offline   Reply With Quote


combustion, solver, sphere

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
BlockMesh FOAM warning gaottino OpenFOAM Native Meshers: blockMesh 7 July 19, 2010 14:11
Import problem ARC Open Source Meshers: Gmsh, Netgen, CGNS, ... 0 February 27, 2010 11:56
Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Native Meshers: blockMesh 10 April 2, 2007 14:00
Import gmsh msh to Foam adorean Open Source Meshers: Gmsh, Netgen, CGNS, ... 24 April 27, 2005 08:19
meshing F1 front wing Steve FLUENT 0 April 17, 2003 12:37

All times are GMT -4. The time now is 06:51.