OpenFOAM Meshing & Mesh Conversion

User Name Remember Me Password

Read this first: How to ask a question on the forums

Page 61 of 152 « First < 11 51 59 60 61 62 63 71 111 > Last »

Threads in Forum : OpenFOAM Meshing & Mesh Conversion

Forum Tools

Search this Forum

		Rating Thread / Thread Starter	Last Post	Replies	Views
		Sticky: [snappyHexMesh] About snappyHexMesh ( 1 2 3) wyldckat	January 7, 2026 11:53 by Drew.M	55	20,286
		Sticky: [blockMesh] About blockMesh wyldckat	October 1, 2022 00:10 by yzj	5	11,008
		Sticky: [Commercial meshers] About the Commercial and Closed Source Meshers discussed here wyldckat	July 22, 2020 23:09 by fumiya	3	9,596
		Sticky: [CAD formats] Creating waterproof STL using snappyHexMesh or salome ( 1 2 3) Tobi	May 13, 2020 07:01 by otaolafr	58	42,049
		Sticky: About the Open Source Meshers discussed here wyldckat	June 5, 2019 05:52 by Enrico Segre	3	12,620
		Sticky: Map of this Meshing (sub-)Forum wyldckat	April 27, 2019 10:33 by wyldckat	0	6,094
		Sticky: cfMesh: Please read this wyldckat	December 30, 2017 20:11 by wyldckat	0	8,497
		[blockMesh] Mesh directions - checkMesh results fusij	April 5, 2018 20:19 by ltiago94	5	4,636
		[mesh manipulation] extrudeMesh xiyuqiu	April 5, 2018 11:58 by mollyli	9	21,498
		[Other] Is it possible to convert 6Sigma file to OpenFoam Gebin Edwin George	April 5, 2018 06:26 by Gebin Edwin George	2	1,529
		[Other] Failed 1 mesh check ( 1 2) camoesas	April 4, 2018 19:53 by ltiago94	26	14,931
		[snappyHexMesh] snappyHexMesh error ianjikar	April 4, 2018 01:30 by ianjikar	5	1,353
		[Other] Why rotate-angle option doesn't exist in transformPoints utility anon_q	April 3, 2018 04:12 by Ardali	1	1,317
		[snappyHexMesh] snappyHexMesh Parallel bad size error andrewpomeroy	April 2, 2018 02:08 by andrewpomeroy	2	2,755
		[snappyHexMesh] mpirun with SnappyHexMesh in cluster subhasis	April 1, 2018 12:26 by Taataa	4	4,529
		[Other] VTK Polyhedron: what is it? rikyepoveri	March 31, 2018 13:54 by rikyepoveri	0	2,321
		[mesh manipulation] extrudeMesh from STL Surface TRT	March 26, 2018 08:15 by ltiago94	1	5,218
		[Commercial meshers] Mesh conversion of a .cfx5 file Fabian2602	March 26, 2018 04:58 by Fabian2602	0	1,141
		[Gmsh] mesh file (gmsh) - convertion barracuda	March 24, 2018 07:24 by barracuda	1	1,047
		[snappyHexMesh] "Foam Fatal Error" When Meshing Raptor22	March 23, 2018 18:39 by Raptor22	0	1,842
		[Salome] SALOME : How to define several CellZone utawalpa	March 23, 2018 14:19 by utawalpa	0	2,587
		[blockMesh] Cavity with Internal Solid Cylinder mucgoo	March 23, 2018 06:10 by mucgoo	8	1,978
		[snappyHexMesh] Avoiding wedge cells and folded cells while adding layers - snappyHexMesh Saideep	March 22, 2018 09:10 by Saideep	2	1,353
		[Gmsh] [gmshToFoam] Y-Dimension Cell Scaling lost djtschke	March 22, 2018 05:58 by djtschke	0	1,048
		[blockMesh] Unable to impliment cyclic Pacth in blockMesh surajkvs	March 21, 2018 04:36 by Antimony	1	1,331
		[Other] mesh convergence problem for heat flux cfd lover	March 20, 2018 04:29 by cfd lover	0	982
		[snappyHexMesh] layer addition problem tankerp	March 20, 2018 01:50 by piu58	6	1,732
		[snappyHexMesh] snappyHexMesh doesnt snap ( 1 2 3) staustrahltriebwerk	March 18, 2018 15:19 by wyldckat	47	35,905
		[mesh manipulation] extrudeMesh for pipe with changing cross section cfd4res	March 18, 2018 12:08 by cfd4res	0	1,224
		[snappyHexMesh] Snappy not linear with large number of regions derekm	March 17, 2018 10:07 by derekm	0	763
		[snappyHexMesh] snappyHexMesh, surfaceFeatureExtract, geometry edge not captured aerospain	March 17, 2018 08:34 by aerospain	15	3,177
		[Other] Dynamic Mesh problem Kimmy	March 16, 2018 14:28 by clapointe	1	1,089
		[Other] Acces to points and faces jimswa	March 16, 2018 06:20 by tomf	1	1,141
		[mesh manipulation] extrudeMesh for pipe bend cfd4res	March 15, 2018 14:04 by cfd4res	0	1,702
		[Other] local mesh has zero cells. Please check the mesh and the decomposition! limonegiallo	March 15, 2018 12:51 by limonegiallo	0	1,023
		[blockMesh] Aerofoil blockMesh andrei.cimpoeru	March 15, 2018 12:16 by elmo555	7	10,584
		[snappyHexMesh] how to create Baffles ? kabiladhi	March 15, 2018 08:58 by kabiladhi	0	1,447
		[snappyHexMesh] Layers collapsing problem Manideep Reddy	March 12, 2018 08:09 by Manideep Reddy	2	1,216
		[blockMesh] blockMesh cylinder with two inlets cfd4res	March 9, 2018 13:02 by cfd4res	4	1,908
		[blockMesh] Error using blockmesh in windows (OpenFOAM v1712) valeng	March 8, 2018 16:45 by valeng	0	1,162
		[Commercial meshers] Mesh conversion problem (fluent3DMeshToFoam) Aadhavan	March 8, 2018 02:47 by mrishi	2	3,716
		[Other] Multiple blocks for moving mesh jiahui_93	March 4, 2018 03:24 by jiahui_93	0	1,205
		[mesh manipulation] RefineMesh Error and Foam warning jiahui_93	March 3, 2018 12:32 by jiahui_93	4	4,822
		[blockMesh] Hole in a cylinder / T-junction of two cylinders using blockMesh anuragm	March 2, 2018 09:36 by anuragm	4	2,373
		[mesh manipulation] refineMesh Error mohsen.boojari	March 1, 2018 23:07 by jiahui_93	3	3,204
		[blockMesh] BlockMesh Backward Facing Step nskelly	March 1, 2018 14:06 by nskelly	2	1,987
		[snappyHexMesh] bad trailing edge boundary layer with snappyHexMesh draufunddran	March 1, 2018 10:42 by potentialFoam	14	7,179

Read this first: How to ask a question on the forums

Page 61 of 152 « First < 11 51 59 60 61 62 63 71 111 > Last »

Display Options

Showing threads 2401 to 2440 of 6051

Sorted By Thread Title Last Post Time Thread Start Time Number of Replies Number of Views Thread Starter Thread Rating Sort Order Ascending Descending From The Last Day Last 2 Days Last Week Last 10 Days Last 2 Weeks Last Month Last 45 Days Last 2 Months Last 75 Days Last 100 Days Last Year Beginning Prefix (any prefix) (no prefix) [blockMesh] [CAD formats] [CGNS] [Commercial meshers] [foamyMesh] [Gmsh] [mesh manipulation] [Netgen] [Salome] [snappyHexMesh] [surface handling] [Technical] [Other]

Forum Tools	Search this Forum
Mark This Forum Read View Parent Forum	Search this Forum : Advanced Search

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules