|December 19, 2011, 10:46||
SGI/OpenCFD release OpenFOAM® version 2.1.0
Join Date: Mar 2009
Posts: 49Rep Power: 9
The OpenFOAM Team at SGI/OpenCFD are pleased to announce the release of version 2.1.0 of their OpenFOAM open source CFD toolbox, 6 months after the release of v2.0.0. Version 2.1.0 is distributed as:
Arbitrary mesh interface (AMI)
A completely new, fully-parallelised, implementation of arbitrary mesh interface (a.k.a. generalised grid interface, or “GGI”) allows simulation with sliding interfaces and non-conformal boundaries. AMI enables rotation of geometries (e.g. for rotating machinery) and more flexibility when using cyclic (periodic) boundaries and coupling simulations between separate mesh regions (e.g. surface film and bulk flow). Further details…
This release includes: a new solver for 2 compressible fluid phases where one phase is dispersed; a new Euler-Euler solver simulate any number of incompressible phases that may be dispersed or ‘VoF’-resolved; and, considerably improved stability and accuracy for interface-capturing in systems with 3 phases or more. Further details…
Free surface flows can now be simulated using potentialFreeSurfaceFoam, an incompressible, Navier-Stokes solver that approximates waves through a wave height field. Bringing significantly lower computational cost than interfacing-capturing approaches, the method is well suited to large scale applications, e.g. in marine and civil engineering sectors. Further details…
The new k-k_l-omega turbulence model can simulate flow with a boundary layer that undergoes a transition from laminar to turbulent flow. A new combustion model has been implemented for non-premixed flames, based on the flame-surface density (FSD) concept. Further details…
Users can now initialise a range of boundary conditions (BCs) to be time-varying, with inline or external tables of data, or polynomial expressions. Other new BCs are introduced, e.g. for the potential-free-surface flow solver. Further details…
Developments relating to run-time control include: additional controls over timing of write dumps; a new #calc directive, introduced as a shortcut to #codeStream; and new features for function objects. Further details…
New additions to the numerical methods in OpenFOAM include support for multiple phases/fields in MULES and the new linear-upwind stablised transport scheme, which has performed well in LES/DES of external aerodynamics on complex geometries. Improvements have been made to the mechanism whereby field sources can be added to equations. Further details…
Other developments include: a new option on the decomposePar utility to leave patches intact; formalisation of the the SIMPLE/PIMPLE loop control structure; support for 64-bit labels; removal on a restriction on format of hostnames and user names. Further details…
OpenFOAM v2.1.0 was produced by the OpenFOAM Team at SGI/OpenCFD — Henry Weller, Mattijs Janssens, Chris Greenshields, Andy Heather, Sergio Ferraris, Gijs Wierink, Laurence McGlashan and Jenya Collings. Thanks to the OpenFOAM enthusiasts who have contributed to a better code through the bug reporting system.
To download OpenFOAM, click here.
Announcement reproduced from http://www.openfoam.com/version2.1.0
|December 20, 2011, 01:24||
Daniel WEI (老魏)
Join Date: Mar 2009
Location: Beijing, China
Blog Entries: 9Rep Power: 13
I just came across to see a reference management software Mendeley which has a place to collect the user ideas using "user voice", the users can vote on it, and it looks very nice.
Why doesn't OpenFOAM try to use it on their website? I think it would be helpful for both sides.
Boeing Research & Technology - China
|Thread||Thread Starter||Forum||Replies||Last Post|
|OpenCFD release OpenFOAM® version 2.0.0||opencfd||OpenFOAM Announcements from ESI-OpenCFD||1||July 1, 2011 08:43|
|OpenFOAM-1.6 install cookbook||MadsR||OpenFOAM Installation||372||November 20, 2010 12:57|
|OpenCFD release OpenFOAM® version 1.7.1||opencfd||OpenFOAM Announcements from ESI-OpenCFD||0||August 26, 2010 11:40|
|32bit version of 01_05_2007 development release||philippose||OpenFOAM Running, Solving & CFD||19||April 18, 2008 08:53|
|Debug and Release version||LiQiang||Main CFD Forum||1||March 30, 2005 14:55|